Toshiba CIX 用户手册

1. While on a call, press 

Cnf/Trn

. Your Line LED flashes green and you hear internal 

dial tone.

2. Dial the extension where the call will be transferred. You can remain on the line 

and announce the call or immediately “blind transfer” the call.

If the privacy option has been disabled, then if you use a 

Line

 button when you 

transfer the call, the LED will flash red until the receiving party answers. While 
the LED is flashing, you can press 

Line

 button to return to the call. If the 

receiving party answers the call, the LED turns solid red and you cannot 
reconnect to the original caller. 

During call transfer, you can connect all three parties by pressing your flashing 
extension button or 

Cnf/Trn

.

•

If you get voice mail, you can leave a message or hang up and let the 
transferred caller leave a message.

•

If you hear a long single tone, then announce the call over the called telephone’s 
speaker.

3. Transfer with Camp On: If the station to which you want to transfer the call is busy, 

you may hang up and the transferred trunk or station will be camped on to the busy 
destination.

1. While on a call, press 

Cnf/Trn

.

2. Enter 

#407

.

3. Enter the VM mailbox number (usually the same as the extension number) + 

#

.

4. Hang up and the caller is connected to the VM mailbox. This feature does a blind 

transfer to VM.

1. While on a call, press 

Cnf/Trn

.

2. Press the DSS button.

3. Hang up and the caller is connected to the VM mailbox.