Bosch DS1103i DS1103I 用户手册
产品代码
DS1103I
Mounting
Mount the DS1103i detector on the ceiling, or on the
wall opposite or adjacent to the window. Coverage
depends on room acoustics and window size.
wall opposite or adjacent to the window. Coverage
depends on room acoustics and window size.
Standard Coverage
7.6 m (25 ft) for glass sizes over 30.5 cm x 30.5 cm
(12 in. x 12 in.).
(12 in. x 12 in.).
Parts included
Quant.
Component
1
Detector
1
Mounting Bracket and 2 screws
1
Literature – Installation Instructions
Technical specifications
Electrical
Current:
21 mA nominal at 12 VDC
Voltage:
9 VDC to 15 VDC
Environmental
Operating
Temperature:
-29°C to +49°C (-20°F to +120°F)
For UL Certificated installations, 0°C to +49°C
(+32°F to +120°F)
Radio Frequency
Interference (RFI)
Immunity:
No alarm or setup on critical frequencies in the
range from 26 MHz to 950 MHz at 50 V/m.
Mechanical
Material:
High-impact ABS plastic enclosure
Dimensions
Unmounted
(HxWxD):
12 cm x 8.3 cm x 1.3 cm
(4.8 in. x 3.25 in. x 0.5 in.)
Flush-mounted
(HxWxD):
12 cm x 8.3 cm x 0.625 cm
(4.8 in. x 3.25 in. x 0.25 in.)
Outputs
Alarm:
Normally-closed (NC) reed relay rated at 3.5 W,
125 mA at 28 VDC for resistive loads
Ordering information
DS1103i Flush‑mount Glassbreak Detector
Rectangular flush mount detector uses
microprocessor-based sound analysis technology
(SAT) to listen for the specific frequencies associated
with breaking glass.
Order number
Rectangular flush mount detector uses
microprocessor-based sound analysis technology
(SAT) to listen for the specific frequencies associated
with breaking glass.
Order number
DS1103i
Accessories
DS1110i Glassbreak Tester
Used to test DS1101i, DS1102i, DS1103i, and DS1108i
Glass Break Detectors. Powered by a 9 V alkaline
battery (supplied).
Order number
DS1110i Glassbreak Tester
Used to test DS1101i, DS1102i, DS1103i, and DS1108i
Glass Break Detectors. Powered by a 9 V alkaline
battery (supplied).
Order number
DS1110i
2 | DS1103i Flush‑mount Glassbreak Detector