Tycon Systems TP-SW8-NC 数据表
PoE 8 Port Switch
Features
High Power 10/100Mb 8 Port PoE Switch
Remotely Power Equipment thru CAT5 Cable up to 100m
Extend Ethernet and POE up to 200m
Up to 2A per Port
Built-In Surge Protection
Automatic MDI/MDI-X Crossover
Automatic Speed and Duplex Sensing
2K Self Learning MAC Address Table
High Temperature Operation
CE and FCC Certification
Applications
Wireless Access Points and Client Devices
IP Phone and Security Camera Systems
Power multiple devices from 1 data cable
Description
The TP-SW8-D Power Over Ethernet 802.3af/at (PoE) 10/100Mb switch offered by Tycon Power Systems is a fully
automatic high speed 8 port Ethernet switch. The -NC version is a non compliant model for devices which are not
802.3af/at compliant. On the -NC version the PoE output voltage = the input voltage so it is
universal in its application. The DC input power range can be from 12V to 57V. The units can
be powered via PoE to port 8 (2A max). Both models supply power to the remote device on
the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to
100m (328 feet) between the PoE switch and the remote device.
automatic high speed 8 port Ethernet switch. The -NC version is a non compliant model for devices which are not
802.3af/at compliant. On the -NC version the PoE output voltage = the input voltage so it is
universal in its application. The DC input power range can be from 12V to 57V. The units can
be powered via PoE to port 8 (2A max). Both models supply power to the remote device on
the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to
100m (328 feet) between the PoE switch and the remote device.
18V, 24V and 48V 60W, 120W and 180W power supplies are available. There are 2 power
inputs for attachment of primary and backup power sources.
inputs for attachment of primary and backup power sources.
Device Pinouts
RJ-45 Port 8 (Data/PoE Input)
RJ-45 Port 1-7 (Data & PoE Out)
Pin
Symbol
Description
Symbol
Description
1
RX+, V+, V-
Data Rx(+), PoE in
RX+
Data Receive(+)
2
RX-, V+, V-
Data Rx(-), PoE in
RX-
Data Receive(-)
3
TX+, V-, V+
Data Tx(+), PoE in
TX+
Data Transmit(+)
4
V+, V-
PoE in,
+Vdc
DC power(+)
5
V+, V-
PoE in
+Vdc
DC power(+)
6
TX-, V-, V+
Data Tx(-), PoE in
TX-
Data Transmit(-)
7
V-, V+
PoE in
-Vdc
DC power(-)
8
V-, V+
PoE in
-Vdc
DC power(-)
DATA SHEET
TP-SW8 Series