Ematic EMD212 用户手册

6

5

fig.4.1

fig.3.2

fig.3.1

fig.2.1

3mm

3mm

• Attach the connecting piece to the glass holder using two screws and space reserved 3mm as shown in fig.2.1.
• 

 

Use the same method to assemble the other glass holder

 P-C

 P-F

 B

 D

Insert the two glass holders into the wall plate along the wall plate rail at the desired height respectively, and 
then tighten four screws with a 3mm Allen key as shown in fig.3.1 . 

Place the two glass shelves gently on the two glass holders respectively. Attach the glass shelves to the glass 
holders using screws and plastic bushing, tighten screws with a 3mm Allen key but don’t tighten completely at this 
time. Center the glass shelves over holes, securely tighten screws with a 3mm Allen key as shown in fig.4.1.  

adjustable in height 

 E

 P-E

 P-F

• Insert two decorative covers to the top and bottom of wall plate respectively and

 

install four plastic covers 

 

as shown in fig.3.2.   

• You can adjust the height of the glass holders as needed.

 

Loosen the screws with a 3mm Allen key (but do 

  not remove) to adjust the glass holders at the desired height and then tighten screws with a 3mm Allen key 
 as shown in fig.3.2.

 P-F

 P-C

 P-C

 P-D

 P-F

 P-C