D-Link 16-port 10/100M NWay Rack Mountable, Auto-negotiation of MDI/MDIX Cross Over and IEEE 802.3x Flow Control DES-1016R+ 产品宣传页
产品代码
DES-1016R+
10/100Mbps Switches for Workgroups
DES-1016R+
DES-1024R+
DES-1024R+
10/100Mbps Unmanaged Switches
Key Features
These unmanaged 10/100Mbps switches are designed to enhance workgroup performance while providing a high level of
flexibility. Powerful yet easy to use, these devices allow users to simply plug any port to either a 10Mbps or 100Mbps network
to multiply bandwidths, boost response time and satisfy heavy load demands.
flexibility. Powerful yet easy to use, these devices allow users to simply plug any port to either a 10Mbps or 100Mbps network
to multiply bandwidths, boost response time and satisfy heavy load demands.
Two choices of switches are available: one with 16
10/100Mbps ports, the other with 24 10/100Mbps ports.
These ports detect the network speed and auto-
negotiate between 100BASE-TX and 10BASE-T, as
well as full- and half-duplex.
10/100Mbps ports, the other with 24 10/100Mbps ports.
These ports detect the network speed and auto-
negotiate between 100BASE-TX and 10BASE-T, as
well as full- and half-duplex.
All 10/100Mbps ports auto-adjust MDI/MDIX twisted-
pair cable cross-over, eliminating the need for cross-
over cables or uplink buttons. You simply plug any
port to a server, a workstation or a hub, using the usual
straight-through twisted-pair cable. The port will auto-
sense the attached device type and adjust the Tx, Rx pin
assignments accordingly before transmitting and
receiving data.
pair cable cross-over, eliminating the need for cross-
over cables or uplink buttons. You simply plug any
port to a server, a workstation or a hub, using the usual
straight-through twisted-pair cable. The port will auto-
sense the attached device type and adjust the Tx, Rx pin
assignments accordingly before transmitting and
receiving data.
An open slot is provided on the front panel to let you
install an optional Fast Ethernet fiber module. This
module provides 2 100Mbps fiber ports for 2 server
connections or switch-to-switch cascading over the
reliable fiber cables, which can be up to 2km long.
install an optional Fast Ethernet fiber module. This
module provides 2 100Mbps fiber ports for 2 server
connections or switch-to-switch cascading over the
reliable fiber cables, which can be up to 2km long.
Choices of 16 or 24 10/100Mbps Ports
Auto-adjustment of MDI/MDIX Cross Over
Optional 100Mbps Fiber Ports
Flow Control Protects Against Data Loss
Easy Expansion
Using flow control (in full duplex and applicable to all
10/100Mbps ports), the switch monitors the buffer status
of each port. During peak usage, if the buffer fills to
capacity, the switch detects this and signals to the
attached node to delay sending new data until the switch
can accept it. This operation minimizes the chance of
any buffer overrun where incoming data overwrites the
current data that has not been completely flushed out of
the buffer. This function works with flow control
supported Fast Ethernet adapters (installed in servers)
connected to the switch in dedicated bandwidth
configuration. It can also be applied to switch-to-switch
cascading.
10/100Mbps ports), the switch monitors the buffer status
of each port. During peak usage, if the buffer fills to
capacity, the switch detects this and signals to the
attached node to delay sending new data until the switch
can accept it. This operation minimizes the chance of
any buffer overrun where incoming data overwrites the
current data that has not been completely flushed out of
the buffer. This function works with flow control
supported Fast Ethernet adapters (installed in servers)
connected to the switch in dedicated bandwidth
configuration. It can also be applied to switch-to-switch
cascading.
Cascading 2 switches together to expand the network
using the twisted-pair ports is easy. As all
10/100Mbps ports support auto-negotiation of
MDI/MDIX twisted-pair cable cross-over, you simply
connect 2 switches together without having to find a
cross-over cable or to make sure the ports are
uplink ports. At 200Mbps full-duplex speed, all ports
provide a fast switch-to-switch dedicated bandwidth.
16 or 24 10/100Mbps ports
using the twisted-pair ports is easy. As all
10/100Mbps ports support auto-negotiation of
MDI/MDIX twisted-pair cable cross-over, you simply
connect 2 switches together without having to find a
cross-over cable or to make sure the ports are
uplink ports. At 200Mbps full-duplex speed, all ports
provide a fast switch-to-switch dedicated bandwidth.
16 or 24 10/100Mbps ports
1 expansion slot for 2 optional 100Mbps fiber ports
Full/half duplex support for each port
Auto-learning of network configuration
IEEE 802.3x flow control in full duplex mode for
protection against data loss
Full/half duplex support for each port
Auto-learning of network configuration
IEEE 802.3x flow control in full duplex mode for
protection against data loss
Back pressure in half duplex mode
Auto-adjustment of MDI/MDIX cross over for each
port
Auto-correction of twisted-pair polarity reverse
RAM buffer dynamically allocated for each port
Auto-adjustment of MDI/MDIX cross over for each
port
Auto-correction of twisted-pair polarity reverse
RAM buffer dynamically allocated for each port
Top: DES-1016R+ switch with 16 auto-sensing 10/100Mbps ports.
Bottom: DES-1024R+ switch with 24 auto-sensing 10/100Mbps ports.
Each switch is equipped with an open slot (on the front) for you to fit in
an optional 2-port 100Mbps Fast Ethernet fiber module.
Bottom: DES-1024R+ switch with 24 auto-sensing 10/100Mbps ports.
Each switch is equipped with an open slot (on the front) for you to fit in
an optional 2-port 100Mbps Fast Ethernet fiber module.