Eaton PW9130N6000T-EBM 用户手册
Rev
1
Page
1
of
3
Eaton 9130 700-6000VA Tower UPS Technical Specification
CONSTRUCTION
Model
PW9130G700T
-XL
PW9130G1000T
-XL
PW9130G1500T
-XL
PW9130G2000T
-XL
PW9130G3000T
-XL
PW9130G6000T
-XL
Rating
700VA/630W 1000VA/900W 1500VA/1350W 2000VA/1800W 3000VA/2700W 6000VA/5400W
Technology
VFI-SS-111, on-line double conversion with power factor correction
UPS Dimensions:
W x D* x H (mm)
W x D* x H (mm)
160x355x250** 160x383x250** 160x435x250** 214x410x345** 214x410x345** 242x542x575
*Allow 150mm rear clearance for connections & air flow **Height includes rubber feet
Colour
Black, RAL9005 (PPC-18)
Weight
(kg)
12.2 14.5
19.0 34.5 34.5 75.5
ENVIRONMENTAL & SAFETY
Ambient storage temperature
-20˚C to +40˚C with batteries and -25˚C to +55˚C without batteries
Ambient service temperature
Power electronics part: +0 to +40
C, Battery part: +5 to 25C without reducing battery life
Maximum service altitude
1000m above sea level.
Relative humidity
5 to 90%, no condensation allowed
Degree of protection
IP20 (EN60529)
Acoustic Noise
<52dBA (700-3000VA), <55dBA (6000VA) Normal mode, typical load and Battery mode
Surge Suppression
EN 61000-2-2, EN 61000-4-2 Level 3
EN 61000-4-3, Level 2 (6kVA = Level 3)
EN 61000-4-4, Level 2 (also on signal ports) (6kVA = Level 3)
EN 61000-4-5, Level 3 Criteria A (IEEE C62.41 6 KV)
EN 61000-4-6, Level 2 (6kVA = Level 3)
EN 61000-4-8, Level 2 (6kVA = Level 4), EN 61000-4-11
EN 61000-4-3, Level 2 (6kVA = Level 3)
EN 61000-4-4, Level 2 (also on signal ports) (6kVA = Level 3)
EN 61000-4-5, Level 3 Criteria A (IEEE C62.41 6 KV)
EN 61000-4-6, Level 2 (6kVA = Level 3)
EN 61000-4-8, Level 2 (6kVA = Level 4), EN 61000-4-11
Safety Markings
CE, GS
Electromagnetic Compatibility
EN 62040−2 Emissions, category C1; Immunity, category C2
Agency Markings
CE, C−Tick
POWER CONNECTIONS
Input
C14 10 Amp
C14 10 Amp
C14 10 Amp
C14 10 Amp
C20 16Amp
Hardwired,
10mm
2
Max
Output
(6) C13 10A
(6) C13 10A
(6) C13 10A
(8) C13 10A,
(1) C19 16A
(8) C13 10A,
(1) C19 16A
Hardwired,
10mm
2
Max
USER INTERFACE
Display
Graphical LCD with blue backlight, 4x LEDs for notice and alarm
Communication Ports
1 x USB (HID), 9600 bps, 1x RS232 (DB9, with 2 opto-coupled relay outputs), 1200-9600 bps,
1 x Minislot Communication Card Slot (Empty)
1 x Minislot Communication Card Slot (Empty)
Signal Inputs
(4) programmable signal inputs (one RS-232 input, two connectivity card signal inputs, and one Emergency
Power Off input) for indicating building alarms or other use
Power Off input) for indicating building alarms or other use
Relay Port
(1) three-pole connector with (1) contact closure (Voltage Free Contact)
Output Relay Specifications
60VDC/2A Max, 30VAC/1A Max
Optional
Minislot cards; Web/SNMP, Modbus, Relay
ELECTRICAL CHARACTERISTICS – INPUT
Number of Input Phases
1 Phase (Separate Rectifier and Bypass inputs available on 6kVA)
Rated input voltage and
voltage tolerance
voltage tolerance
Rectifier : 230Vac nominal (200, 208, 220, 240V Selectable)
700-1500VA Tolerance: 120/140/160-276V (33%/66%/100% 0.7pf Load)
180-276V, (-22%, +20% at 0.8pf Load)
190-276V, (-17%, +20% at 0.9pf Load)
180-276V, (-22%, +20% at 0.8pf Load)
190-276V, (-17%, +20% at 0.9pf Load)
2000-3000VA Tolerance: 140/160/180-276V (33%/66%/100% 0.7pf Load)
190-276V, (-17%, +20% at 0.8pf Load)
200-276V, (-13%, +20% at 0.9pf Load)
190-276V, (-17%, +20% at 0.8pf Load)
200-276V, (-13%, +20% at 0.9pf Load)
6000VA Tolerance: 120/140/160/180-276V (25%/50%/75%//100% 0.9pf Load)
Bypass tolerance: 196-253V (-15%, +10% of nominal)
Operating Frequency
50 or 60Hz; Tolerance 40-70Hz
Input current distortion
700-3000VA: <8% THDi. 6000VA: 5% THDi (Linear load condition at rated input current)
Input power factor
≥0.99pf
Inrush Current
700-3000VA: <45A (peak) decaying exponentially within 30 ms. 6000VA: 150A <1ms
Rated Input Current @ 230V
3.0A
4.3A
7.2A
8.7A
13.0A
28.6A
Dedicated Supply CB Rating
6A 6A 10A 10A 16A 40A