Eaton SF8RM 产品宣传页

 

Class II & III/Cat B & A, Single Phase Rack Mounted Filter/PDU

The SF8RM is designed to protect equipment against power surges & electrical noise whilst providing a convenient 

combination of power outlets to suit most applications. A unique mounting system allows mounting in many different 

modes to suit crowded racks. Even if no rack space exists, the units may be mounted externally on the front or rear of 

the rack. For horizontal mounting, the units require a single 1RU rack space for installation. The unit may also be flush 

mounted to either side of a rack or cabinet.

Technical Specifications

SF8RM

Current rating

10A total

Configuration

Single-phase, L/N/E.

Surge Protection Category

AS/NZS1768-2007 Category B

Primary protection modes

L-N, L-E, & N-E

Secondary protection modes

L-N, L-E, & N-E

Surge rating (8/20uS L-N)

22.5kA

Let-through voltage

< 700V@ 3kA

Overvoltage withstand

300VRMS

Filter type

Low Q/low C filter providing differential & common-mode filtering.

Attenuation

> 50dB above 1MHz.

Voltage drop

Less than 3V at rated load.

Input connection

Approved power cord with Australian 10A plug

Output connections

Australian 3 pin 10A (x8).

Enclosure

Steel, powder coated, black.

Dimensions (without brackets)

441 x 120 x 44 mm (W x D x H)

Weight

1.2kg

Surge Filter, 1 Phase 10A, 25kA Primary        

  

Due to continual product improvement specifications are subject to change without notice. Copyright 2010 Eaton Corporation.

 Key Features

• 8 way 10A Power Filter

• Can be rack or surface mounted

• 3 mode, 3 stage protection

• Resettable circuit breaker for over-current protection