Eaton SSF15I 产品宣传页
www.eaton.com/powerquality www.eatonelectric.com.au
Eaton® SSFI
Class III/Cat A, Portable Surge Filter
Applications
• Plug-in UPS systems
• Servers
• Portable instrumentation
• POS systems
• Small office systems
• Industrial & rural surge prone sites
The SSFI is designed to provide secondary protection against power surges caused by external sources such as lightning strikes &
substation switching, as well as providing a measure of protection from surge events generated on the secondary side of the filter.
The unit has been designed in accordance with AS3100, AS1768, IEC61643-1, IEC61000-6-1, 2, 3, 4 & other standards & codes as
applicable.
The SSFI is a 3-stage protection unit utilising primary & secondary MOV protection in conjunction with a Low-Q LC filter. The unit
provides filtering of the line harmonics, noise & RF transmitters with a cut-off frequency of <10kHz & a minimum attenuation of 40dB
above 1Mhz. The operation status of the SSFI is indicated by lamps on the front panel. The "OK" light indicates that power is applied to
the SSFI. The "FAULT" light indicates that the surge protection circuitry is damaged & the unit should be replaced. An ideal device for
Category A locations.
Key Features
• Surge suppression & filtering in a single package
• Small footprint, modular design
• Enclosed in IP 20 painted metal housing
• Surge suppression rating of 20kA (L-N)
• Protection Fail Indicators
• 3 mode, 3 Stage Protection
• 12 Month Warranty
Surge Filter, 1 Phase 10A & 15A, 25kA Primary
Surge Category
SSF10I & SSF15I are
suitable for use in
category locations:
Class III/Cat A
(6kV/200A) Long final sub
circuits & power outlets