3M 5313 用户手册
Scotch-Seal
5313 Preformed Sealant Strip
Product Data Sheet
Updated
: March 1996
Supersedes
: November 1993
Product Description
5313 is a tacky solid
extrusion based on a
synthetic rubber. The
adhesive strength of 5313 is
sufficient to cause cohesive
failure of the sealer before
loss of adhesion to the
substrate, when pulled in
tension.
extrusion based on a
synthetic rubber. The
adhesive strength of 5313 is
sufficient to cause cohesive
failure of the sealer before
loss of adhesion to the
substrate, when pulled in
tension.
The sealer is a non-curing
type and retains the same
properties and consistency
after ageing in several
different environments,
including weathering.
type and retains the same
properties and consistency
after ageing in several
different environments,
including weathering.
Physical Properties
Not for specification purposes
Solvent
None
Flash Point
None
Consistency
Solid Rubber Extrusion
Solids Content
99% by wt.
Specific Gravity
1.3 (approx)
Colour
Black
Shelf Life
12 months from date of despatch by 3M when stored in the
original carton at 21°C (70°F) & 50 % Relative Humidity
original carton at 21°C (70°F) & 50 % Relative Humidity
Performance
Characteristics
Characteristics
Not for specification purposes
Service Temperature
Range
Range
-29°C to 100°C (-21°F to 212°F)
Water Resistance
Excellent
Weathering Resistance
Excellent
Fuel & Oil Resistance
Poor
Compatibility Data
Supported PVC
Paint (automotive enamel)
Paint (automotive enamel)
(automotive lacquer)
No migration staining.
} No staining, pinholing or
} softening.
} No staining, pinholing or
} softening.
Compression Data
Two beads, 9mm diameter x 75mm long compressed to
0.2" at 50mm/minute.
Force to compress - 35 lb
5 minute rebound height - 0.220"
0.2" at 50mm/minute.
Force to compress - 35 lb
5 minute rebound height - 0.220"