TP-LINK AV500 TL-PA4010KIT 用户指南

 

7

 

 

This section describes how to connect the Powerline Adapter into your existing ADSL broadband 
connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline 
Adapter to your ADSL broadband connection: 

1． Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port. 

2． Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of your ADSL 

broadband Router. 

3． Plug the Powerline Adapter into a wall socket next to the computer. 

4． Turn on your computer. 

5． Check and confirm that the 

  Power LED, 

 Ethernet  LED, and 

 Powerline LED on the 

Powerline Adapter are ON. 

The hardware connection mechanism is shown below: