Testo testo 735-2 Digital Thermometer Pt100: -200 up to +800 ºC/Type K: -200 up to +1370 ºC 0563 7352 用户手册

5.

Operation

This chapter describes the steps that are executed frequently when using the

product.

5.1 Connecting a probe

Plug-in probes
Plug-in probes must be connected before the measuring instrument is
switched on so that they are recognised by the instrument. 

i

Insert the connector of the probe into the probe socket of the measuring
instrument.

Radio probes

Radio probes may only be used in countries in which they have been Type
Approved (see application information of the radio probe).

A radio module (accessory part) is required for the use of radio probes. The

radio module must be connected before the measuring instrument is switched

on so that it is recognised by the measuring instrument. 
Each radio probe has a probe ID (identification number) which must be set in
configuration mode. 

º

See chapter 

P

ROBE

, p. 43.

5.2 Switching on/off

²

Switching tthe iinstrument oon: 

i

Press .
- Only 735-2: If probe adjustment data are stored in the instrument and

activated, Adjustm. active appears in the display (duration: 2s).

º

See chapter 

P

ROBE

, p. 43.

- Measurement view is opened: The current reading is displayed, or 

----

lights up if no reading is available.

Instruments with a memory: The activated location is displayed

(topmost line).

-oor-

5. Operation

38