Testo testo 735-2 Digital Thermometer Pt100: -200 up to +800 ºC/Type K: -200 up to +1370 ºC 0563 7352 用户手册

6.2.3 Mean 

The menu item Mean value calculation is only available in the instrument
testo 735-2. In the instrument testo 735-1, the function Mean value
calculation is called up with the function button 

. 

For carring out Mean value calculation see chapter Measuring, page 50.

6.2.4 Cyclical Print (735-1 only) 

The Cyclical Print function can be activated/deactivated. A measuring program

for cyclical printing can be programmed. This enables readings (up to 999) to

be printed in a defined measuring cycle (min. 1min). The readings are sent to a

Testo printer.

²

Activating ccyclical pprinting/programming aa m

measuring pprogram: 



The main menu is open, Menu is displayed.

cyc.Print ¬

. 

Press / to 

select 

Off

(deactivated) or On (activated) and confirm

with . 

The measuring cycle is set in the order: minutes/hours.

Press 

/ 

to set the measuring cycle in minutes and confirm with

.

Perform the setting for hours as described in step 

.

Press 

/ 

to set the number of readings and confirm with 

.

- The instrument returns to measurement view. 
- The measurement series is programmed and cyclical print can be

started with 

.

6.2.5 Alarm

The alarm thresholds can be set. The default settings for the alarm thresholds
are the limit values for the measuring range. 
If an alarm threshold is exceeded or undershot during a measurement, an alarm
tone is emitted. 

testo 735-2 only: The alarm thresholds are related to the location. They are
only applied to the location that was activated in the setting. 

6. Setting the instrument

48