MEAN WELL PB-600-24 Lead Acid Battery Charger, For V Batteries PB-600-24 用户手册

1

AC INPUT

ON 

OFF

PB-600 is MW's next generation smart charger. It has many of the protective features 

tha t con sumers wou ld li ke to have in a charger includ ing b atte ry miscon nectio n 

(wrong voltage), reverse polarity, battery disconnection or not connected, and battery 

failure analysis. The latest high efficiency switching topology plus microcontroller 

power management are utilized in its design. Three types of charging curves are 

offered for lead acid battery charging, 2 stages for quick charging, 3 stages (quick + 

float), and 8 stages for optimized charging. Charging stage selection can be easily 

made by the user through the selection switch on the front panel.

Depending on battery brand and type (lead acid, gel, lithium iron, and lithium manganese); 

the battery may require special charging curves and adjustment to the protective 

functions which differs from the standard settings. The charging curves and protective 

functions can be customized by reprogramming its firmware. Basically, you can change 

the voltage/current settings of each individual stage plus adjust or cancel the protective 

functions. Please note, the factory charging curve is for charging lead-acid battery.  

Please contact MW regarding other types of battery charging requirements.

◎Designed for charging lead acid battery.
◎Must be installed in a dry and well ventilated area. It should not be exposed to rain 

or snow.

prevent excessive voltage drop. Too much voltage drop will lead to longer charging 

period.

resulting from improper operation will result in cancellation of warranty.

◎The cables between charger and battery should be kept as short as possible to 

◎Please make sure charging voltage and current meets battery specification.
◎Refrain from connecting new and old batteries in series.

◎Three years warranty is provided under normal operating conditions. Failure 

◎Charger should be in the OFF mode before making battery connection or disconnection.

AC INLET ON/OFF SWITCH

Fan 
Ventilation 
Hole

Figure 2.1 Front Panel