Intel BONANZA S478 I875 ATX DDR BLKD875PBZLK 用户手册
产品代码
BLKD875PBZLK
Intel Desktop Board D875PBZ Technical Product Specification
60
2.8.2 Internal I/O Connectors
The internal I/O connectors are divided into the following functional groups:
• Audio (see page 61):
• Audio (see page 61):
Auxiliary line input
Front panel audio
ATAPI CD-ROM
Front panel audio
ATAPI CD-ROM
• Power and hardware control (see page 63):
Fans [four]
ATX12V
Main power
Chassis intrusion
ATX12V
Main power
Chassis intrusion
• Add-in boards and peripheral interfaces (see page 66):
PCI bus [five]
AGP
Parallel ATA IDE [two]
Serial ATA/Serial ATA RAID [two]
Diskette drive
SCSI hard drive activity LED
AGP
Parallel ATA IDE [two]
Serial ATA/Serial ATA RAID [two]
Diskette drive
SCSI hard drive activity LED
2.8.2.1 Expansion
Slots
The Desktop Board D875PBZ has the following expansion slots:
• AGP connector: The AGP connector is keyed for Universal 0.8 V AGP 3.0 cards or 1.5 V
• AGP connector: The AGP connector is keyed for Universal 0.8 V AGP 3.0 cards or 1.5 V
AGP 2.0 cards only. Do not install a legacy 3.3 V AGP card. The AGP connector is not
mechanically compatible with legacy 3.3 V AGP cards.
mechanically compatible with legacy 3.3 V AGP cards.
• Five PCI rev 2.2 compliant local bus slots: PCI add-in cards with SMBus support can access
sensor data and other information residing on the Desktop Board D875PBZ.
✏
NOTE
This document references back-panel slot numbering with respect to processor location on the
Desktop Board D875PBZ. The AGP slot is not numbered. PCI slots are identified as PCI slot #x,
starting with the slot closest to the processor. Figure 19 on page 66 illustrates the Desktop Board
D875PBZ’s PCI slot numbering.
Desktop Board D875PBZ. The AGP slot is not numbered. PCI slots are identified as PCI slot #x,
starting with the slot closest to the processor. Figure 19 on page 66 illustrates the Desktop Board
D875PBZ’s PCI slot numbering.