Gw Instek GSP-830Spectrum analyzer, spectrum analyzerBandwidth (RBW) 3/30/300 kHz/4 MHz GSP-830 数据表

con:trig:single 

Sets the trigger condition to single. 

con:trig:cont 

Sets the trigger condition to continuous. 

con:trig:ext 

Sets the trigger to external mode. 

con:trig:delay 

Sets the trigger delay in msec. 
Example: con:trig:delay_1000 (1000ms delay) 

con:trig:freq 

Sets the trigger frequency in MHz. 
Example: con:trig:freq_1 (1MHz) 

Display 

 

con:disp:dim 

Selects the display dimmer level. Parameter: 0 to 5 
Example: con:disp:dim_2 (dimmer level 2) 

con:disp:dl 

Turns On/Off display line. Parameter: on, off 
Example: con:disp:dl_on (display line On) 

con:disp:dl:level 

Sets the display line level in current unit. 
Example: con:disp:dl:level_−50 (display line at −50dBm) 

con:disp:title:show 

Sets and shows the display title. The title is case sensitive. 
Example: con:disp:title:show_SAtest (title is SAtest) 

con:disp:title:clr 

Clears the display title. 

con:disp:split:upper  Turns On and sweeps upper window in split window mode. 
con:disp:split:lower 

Turns On and sweeps lower window in split window mode. 

con:disp:split:alt Sweeps 

the 

upper/lower window alternatively in split mode. 

con:disp:split:full 

Goes back to full screen mode. 

File 

 

con:file:copy 

Copies file. Need to specify the source and destination file. 
Parameter: ta/tb/tc (traceA/B/C), t1to10 (trace1to10), lh/ll 
(high/low limit line), lh1to5 (high limit line 1to5), ll1to5 (low 
limit line 1to5), c1to5 (correction set 1to5), q1to10 (sequence 
1to10), s1to10 (setup 1to10), file name in USB flash drive 
Example: con:file:copy_t10_ta (copy from trace10 to traceA) 
Example: con:file:copy_ta_mytrace (copy from traceA to a file 
in external USB flash named mytrace) 

con:file:del 

Deletes file. Need to specify the source and destination file. 
Parameter: ta/tb/tc (traceA/B/C), t1to10 (trace1to10), lh/ll 
(high/low limit line), lh1to5 (high limit line 1to5), ll1to5 (low 
limit line 1to5), c1to5 (correction set 1to5), q1to10 (sequence 
1to10), s1to10 (setup file 1to10), file name in external USB 
flash drive. Example: con:file:del_t10 (delete trace10) 
Example: con:file:del_myspace (delete a file names myspace 
in extrenal USB flash drive) 

con:file:prtsc:tofile 

Saves the display image to external USB flash drive. Need to 
specify the file name. Example: con:file:prtsc:tofile_myscreen 
(saves the display image to a file named myscreen)