Renkforce R-2000U STEREO-RECEIVER 29265c4 数据表

•  Never connect the mains plug to a mains socket immediately after the device has been taken from a cold

to a warm environment. The resulting condensation may destroy the device. Allow the device to reach 

room temperature before connecting it. Wait until the condensation has evaporated.

•  Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the

intended grip areas.

•  Disconnect the device from the power supply if not used for an extended period (e.g. during storage), pull

the mains plug from the mains socket. Remove the batteries from the IR remote control as well.

•  Disconnect the mains plug from the mains socket during thunderstorms for reasons of safety.
•  Do not listen to excessively loud music over an extended period of time. This may damage your hearing.

Periodically verify the technical safety of the device, e.g. check for damage to the mains cable or the 

casing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately 

and make sure it is not operated unintentionally. Unplug the mains adapter from the mains socket!
It can be assumed that safe operation is no longer possible if:
•  there is visible damage to the device or to the mains cable
•  the device no longer works
•  the device has been stored under unfavourable conditions for an extended period of time
•  if it has been subjected to heavy stress during transport
Always observe the following safety information before cleaning or servicing the device:

  Live components may be exposed if covers are opened or components are removed. The device 

must be disconnected from all power sources before any servicing or repair work is carried out. 

 

Capacitors inside the device may still carry voltage even though they have been disconnected 

from all power sources.

 

Only qualified experts familiar with the hazards involved and the relevant regulations must per-

form repairs.

Cleaning
Clean the exterior of the device with a soft, dry cloth or brush only. Never use any aggressive cleansing 

agents or chemical solutions since these may damage the casing or impair its function.