3M Weatherproof adhesive tape (L x W) 6 m x 19 mm Black Super 88 3M 80610139521 数据表
产品代码
80610139521
2 of 2
Specifications
Product
The tape is based on polyvinyl chloride (PVC) and/or its
copolymers and has a rubber-based, pressure-sensitive
adhesive. The tape shall be 8.5 mils thick, and be UL
Listed and marked per UL Standard 510 as “Fame
Retardant, Cold and Weather Resistant.” The tape must
be applicable at temperatures ranging from 0°F through
100°F (-18°C through 38°C) without loss of physical
properties. The tape shall be classified for use in both
indoor and outdoor environments. The tape shall be
compatible with synthetic cable insulations, jackets and
splicing compounds. The tape will remain stable and
will not telescope more than 0.1 inches when maintained
at temperatures below 120°F (50°C).
copolymers and has a rubber-based, pressure-sensitive
adhesive. The tape shall be 8.5 mils thick, and be UL
Listed and marked per UL Standard 510 as “Fame
Retardant, Cold and Weather Resistant.” The tape must
be applicable at temperatures ranging from 0°F through
100°F (-18°C through 38°C) without loss of physical
properties. The tape shall be classified for use in both
indoor and outdoor environments. The tape shall be
compatible with synthetic cable insulations, jackets and
splicing compounds. The tape will remain stable and
will not telescope more than 0.1 inches when maintained
at temperatures below 120°F (50°C).
Engineering/Architectural
Specification
Primary electrical insulation (branch wiring in wet or
dry locations): All splices for 600-volt wire rated
105°C (220°F) and below shall be insulated with a
minimum of two half-lapped layers of Scotch® Vinyl
Electrical Tape Super 88. All connectors having
irregular surfaces shall be padded with 3M™
Scotchfil™ Electrical Insulation Putty or Scotch®
Linerless Rubber Splicing Tape 130C prior to
insulating with Scotch Vinyl Electrical Tape Super 88.
dry locations): All splices for 600-volt wire rated
105°C (220°F) and below shall be insulated with a
minimum of two half-lapped layers of Scotch® Vinyl
Electrical Tape Super 88. All connectors having
irregular surfaces shall be padded with 3M™
Scotchfil™ Electrical Insulation Putty or Scotch®
Linerless Rubber Splicing Tape 130C prior to
insulating with Scotch Vinyl Electrical Tape Super 88.
Mechanical protection (outer jacketing)
All rubber and thermoplastic insulating high voltage
power cable tape splices and repairs shall be over
wrapped with at least two half-lapped layers of
Scotch® Vinyl Electrical Tape Super 88.
power cable tape splices and repairs shall be over
wrapped with at least two half-lapped layers of
Scotch® Vinyl Electrical Tape Super 88.
Installation
The tape shall be applied in half-lapped layers with
sufficient tension to produce a uniform wind (for most
applications this tension will reduce the tape’s width to
approximately 5/8 of its original width). On pigtail
splices, the tape shall be wrapped beyond the end of the
wires and then folded back, leaving a protective cushion
to resist cut-through. Wrap tape up-hill, taping from a
smaller diameter surface to a larger diameter surface.
Apply the tape with no tension on the last wrap to prevent
flagging.
sufficient tension to produce a uniform wind (for most
applications this tension will reduce the tape’s width to
approximately 5/8 of its original width). On pigtail
splices, the tape shall be wrapped beyond the end of the
wires and then folded back, leaving a protective cushion
to resist cut-through. Wrap tape up-hill, taping from a
smaller diameter surface to a larger diameter surface.
Apply the tape with no tension on the last wrap to prevent
flagging.
Maintenance/Shelf Life
Scotch Vinyl Electrical Tape Super 88 has a 5-year shelf
life (from date of manufacture) when stored under the
following recommended storage conditions. Store behind
present stock in a clean dry place at a temperature of 70°F
(21°C) and 40-50% relative humidity.
life (from date of manufacture) when stored under the
following recommended storage conditions. Store behind
present stock in a clean dry place at a temperature of 70°F
(21°C) and 40-50% relative humidity.
Availability
Scotch Vinyl Electrical Tape Super 88 is available from
your local 3M authorized distributor in the following
standard roll sizes.
your local 3M authorized distributor in the following
standard roll sizes.
¾ in. x 66 ft.
¾ in. x 44 ft.
¾ in. x 36 yd.
1-1/2 in. x 44 ft.
1-1/2 in. x 36 yd.
¾ in. x 44 ft.
¾ in. x 36 yd.
1-1/2 in. x 44 ft.
1-1/2 in. x 36 yd.
Other lengths and widths are available by special request.
3M, Scotch and Scotchfil are trademarks of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability:
This product will be free from defects in material and manufacture for a period of three (3) years from the time of manufacture. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product
or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of the legal theory asserted.
This product will be free from defects in material and manufacture for a period of three (3) years from the time of manufacture. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product
or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of the legal theory asserted.
Electrical Markets Division
6801 River Place Blvd
Austin, TX 78726-9000.
6801 River Place Blvd
Austin, TX 78726-9000.
Please recycle. Printed in U.S.A.
800/245-3537
©3M 2007 All rights reserved.
Fax 800/245-0329
78-8124-4857-5_D
www.3M.com/electrical