Ebm Papst Axial fan 24 Vdc 570 m³/h (W x H x D) 119 x 119 x 38 mm 4114 N/2H8P 用户手册
产品代码
4114 N/2H8P
page 2 of 4
Electrical voltage and current
DANGER
Electrical voltage
Regularly check the electrical
equipment of the product.
Electrical voltage
Regularly check the electrical
equipment of the product.
Eliminate immediately loose
connections and defective cables.
connections and defective cables.
Safety and protective functions
DANGER
Missing safety device and faulty
protective equipment.
Without protective equipment severe
injuries can occur, e.g. by taking hold of
the rotating equipment.
Missing safety device and faulty
protective equipment.
Without protective equipment severe
injuries can occur, e.g. by taking hold of
the rotating equipment.
Operate the product with protection
guards only.
guards only.
Electromagnetic radiation
Electromagnetic compatibility (EMC) may affect the system integration
of the product due to interaction.
Ensure the electromagnetic compatibility of the entire system.
Moving parts
DANGER
Self-starting product
If voltage is applied, the motor
automatically restarts after a mains
failure or when blocking has been
eliminated.
If voltage is applied, the motor
automatically restarts after a mains
failure or when blocking has been
eliminated.
Do not stand in the danger zone of
the product.
the product.
Switch off the mains voltage when
working on the product and secure
against switching on again.
working on the product and secure
against switching on again.
DANGER
Rotating impeller
Contact with the impeller may result in
injuries.
Rotating impeller
Contact with the impeller may result in
injuries.
Before starting the product, ensure
that it is securely fixed and that the
guards are in place.
that it is securely fixed and that the
guards are in place.
DANGER
Faults in safety installations
Safety installations (e.g. smoke
detectors) may be affected by the
airflow of the product.
Faults in safety installations
Safety installations (e.g. smoke
detectors) may be affected by the
airflow of the product.
If necessary, provide other suitable
safety measures.
safety measures.
DANGER
Blocking of escape routes
The product can create dangerously
high pressure.
Blocking of escape routes
The product can create dangerously
high pressure.
When operating the product ensure
that there is adequate supply and
exhaust air.
that there is adequate supply and
exhaust air.
WARNING
Parts transported by the airflow
The product can transport small parts
in the airflow and catapult them out.
Parts transported by the airflow
The product can transport small parts
in the airflow and catapult them out.
Ensure that there are no loose
small-parts in the intake and
exhaust area.
small-parts in the intake and
exhaust area.
Do not stand in the danger zone of
the product.
the product.
WARNING
Rotating fan
Rotating fan
Long hair, loose-fitting garments and
jewellery can be caught and pulled into
the product. Risk of injury.
jewellery can be caught and pulled into
the product. Risk of injury.
Do not wear loose-fitting garments
or jewellery when working on
moving parts.
or jewellery when working on
moving parts.
Protect long hair by wearing a hair
net.
net.
CAUTION
High risk of fire spreading
Can cause fire to spread.
High risk of fire spreading
Can cause fire to spread.
Never direct the airflow
(intake/exhaust side) at a potential
source of fire.
(intake/exhaust side) at a potential
source of fire.
CAUTION
Extinguishing flames
The airflow can extinguish flames (e.g.
of a gas burner).
Extinguishing flames
The airflow can extinguish flames (e.g.
of a gas burner).
Do not direct the airflow
(intake/exhaust side) at an open
flame.
(intake/exhaust side) at an open
flame.
Hot surface
CAUTION
High temperature at motor housing.
High temperature at motor housing.
Risk of burns
Provide adequate protection against
accidental contact.
accidental contact.
Emission
DANGER
Acoustic alarms can be overheard.
Alarm signals can be overheard
Alarm signals can be overheard
Take technical protective measures,
e.g. optical warnings.
e.g. optical warnings.
WARNING
A noise pressure level higher than
70dB(A) is possible depending on
the installation and operating
conditions.
Risk of deafness due to noise.
A noise pressure level higher than
70dB(A) is possible depending on
the installation and operating
conditions.
Risk of deafness due to noise.
Take technical protective measures.
Provide operating personnel with
protective equipment, e.g. ear
protection.
Provide operating personnel with
protective equipment, e.g. ear
protection.
Transport
Only transport the product in its original packaging. Secure during
transport.
The vibration values, temperature and climate ranges should not be
exceeded during transport.
Storage
Store the product in a dry and clean environment that is well protected.
Ensure that the storage temperature is adhered to,see Chapter 3,
Technical Data.If the product is not operated for a longer period of
time, we recommend running it for approx. 15 minutes annually to
move the motor bearings.