3M 8830 80611327760 数据表

3M

™

 No Polish LC Connector 

provides fast on-site termination  

of 250 μm and 900 μm 

terminations utilizing a one-piece, 

pre-assembled design.

The LC compatible connector 

consists of a factory-polished fiber/

ferrule assembly and a mechanical 

splice that is terminated with a 

simple field tool. To maximize 

field installation yield, the splice 

in the connector can be opened 

and reused with a cap lifter, which 

is integrated with dust cap.  The 

streamlined boot is attached to 

the connector body, minimizing 

the chance of losing it during the 

termination process. After the 

installation, the boot keeps the fiber 

from kinking, even during side pull.

On the 3M

™

 No Polish LC 

Connector Assembly Tool 8835-AT, 

the connector receptacle is hinged 

allowing for easy insertion and 

removal of the LC NPC connector.

3M

™

 No Polish LC/UPC Connector Family

The LC NPC Connector is tested for FTTP and Premises applications for indoor 

and outdoor locations and is RoHS compliant.*

Field termination

Right cable length with virtually no cable slack 

to store

One-piece, pre-assembled design

No small, loose parts

Duplexing capability built into connector design Separate duplex clip unnecessary

Factory-polished fiber stub

No on-site polish or adhesives required

900 μm buffer strain relief

Excellent pull out strength

Simple assembly tool

Fast and easy installation

Fiber holder for assembly

Aligns and guides fiber into connector with

optimal insertion force