Rayming TN-202 用户手册

 

PAGE 5 OF 15 

TN202-UG V1.2  

 

 

1.  GETTING STARTED WITH TRIPNAV

 

These are only a few simple steps that you need to follow before using your TripNav PDA GPS 
receiver:  

•  Install the TN-202 into the Compact Flash port of your PDA. 

•  Install your own personal street mapping software (configuration settings within your software may 

require you to select the Compact Flash port as the source of the GPS data). 

•  Your PDA should have a fully charged battery when using the TN-202, in addition to using an 12V 

PDA charging cable (optional) while in a vehicle to keep the battery voltage constant. 

 
 
 

2.  INSTALLING THE TRIPNAV TN-202 GPS RECEIVER 

The TN-202 GPS supports plug and play. 
 

 

•  Plug in TN-202 GPS into a PDA equipped with a Compact Flash interface slot. 

•  Running suitable mapping/navigation software, select the correct COM port & baud rate: 

4800,N,8,1.  (Usually the COM port is COM2, but will depend on the actual PDA model). 

•  User’s can utilize the included test program to detect the COM port that the TN-202 is using.