Elitegroup 945GCT-M3 用户手册
Installing the Motherboard
23
Connecting I/O Devices
The backplane of the motherboard has the following I/O ports:
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
audio output by changing the driver utility setting.
PS2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard
Use the lower PS/2 port to connect a PS/2 keyboard.
Parallel Port
(LPT)
(LPT)
Serial Port
Use the COM port to connect serial devices such as mice or
(COM1)
fax/modems.
VGA Port
Connect your monitor to the VGA port.
1394a Port
Use the 1394a port to connect to any firewire device.
(Optional)
LAN Port
Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
USB Ports
Use the USB ports to connect USB devices.
Audio Ports
Use the audio jacks to connect audio devices. The D port is
for stereo line-in signal, while the F port is for microphone
in signal. This motherboard supports 8-channel audio de-
vices that correspond to the A, B, C, and E port respec-
tively. In addition, all of the 3 ports, B, C, and E provide
users with both right & left channels individually. Users
please refer to the following note for specific port function
definition.
for stereo line-in signal, while the F port is for microphone
in signal. This motherboard supports 8-channel audio de-
vices that correspond to the A, B, C, and E port respec-
tively. In addition, all of the 3 ports, B, C, and E provide
users with both right & left channels individually. Users
please refer to the following note for specific port function
definition.
Use LPT to connect printers or other parallel communica-
tion devices.
tion devices.
A: Center & Woof er
D: Line-in
B: Back Surround
E: Front Out
C: Side Surround
F: Mic_in Rear