Bosch Appliances Home Security System DVA-12T 用户手册

en | Hardware Installation

RAID Subsystem DVA-12T | Installation Manual

F.01U.027.798 | V1 | 2006.06

Bosch Security Systems

Table 3.1 shows a flowchart of the installation procedure. As you complete each step, check 

off the “Done” box on the right. Please use this flowchart in conjunction with the instructions 

that follow. 

Use the Unpacking Checklist in your package to verify package contents. Carefully check the 

items contained in each box before proceeding with installation.

The 2U RAID subsystem has been designed to fit into a standard cabinet or rack. Two (2) slide 

rails are available for installing the subsystem into a rack or cabinet (see 

Section 8.2 Accessories). The subsystem should be installed in the rack or cabinet before the 

hard drives and the drive trays are installed. If the drive trays with the associated hard drives 

are installed, the subsystem will be too heavy to mount into a rack or cabinet. When installing 

the subsystem into a rack or cabinet it is advisable that three (3) people assist in the mount-

ing process.

To install the subsystem into a rack or cabinet, please refer to the installation instructions that 

came with the slide rails.

Once the hard drives have been installed in the drive trays, the drive trays can be installed into 

the RAID subsystem.

1.

All drive trays must be installed into the enclosure even if they do not contain a hard 

drive. If the trays are not installed into the enclosure, the ventilation required for cooling 

will not be normalized and the subsystem will overheat. Make sure the key-lock is in the 

unlocked position, i.e., the groove on its face is in a horizontal orientation. If the groove is 

in a vertical position, then the key-lock is locked and the front flap on the drive tray can-

not be opened.

1

Unpack

See Section 3.5 Unpacking the Subsystem

2

Rack/Cabinet Installation

See Section 3.6 Rack/Cabinet Installation

5

Drive Tray Installation

See Section 3.7 Drive Tray Installation

6

Cable Connection

 

7

Power On

 See Section 5.3 Power On

Installation Procedure Flowchart

A detailed packing list can be found in your product shipping package or product CD.

All drive trays must be installed into the enclosure even if they do not contain a hard drive. If 

the trays are not installed into the enclosure, the ventilation required for cooling will not be 

normalized and the subsystem will overheat.