Euphonix AM713 用户手册
Euphonix MADI Converters Operation Manual
AM713 and MA703 Converters
16
2.6
Synchronization
2.6.1
AM713
The AM713’s Sample Rate is set externally by one of two source signals or internally
by crystals and associated circuitry. The Sample Rate Source is determined automati-
cally by the presence of signals when the AM713 is powered on. The order in which
external signals are tested for presence is: AES, Word, Internal.
by crystals and associated circuitry. The Sample Rate Source is determined automati-
cally by the presence of signals when the AM713 is powered on. The order in which
external signals are tested for presence is: AES, Word, Internal.
The detected signal immediately becomes the source for the AM713’s sample rate
clock. The auto-sensed Sample Rate Source can be overridden using the button on the
front panel of the AM713, below the Sample Rate Source LEDs. If neither AES nor
Word Clock signals are present, the AM713 uses its internal clock driven by crystals.
clock. The auto-sensed Sample Rate Source can be overridden using the button on the
front panel of the AM713, below the Sample Rate Source LEDs. If neither AES nor
Word Clock signals are present, the AM713 uses its internal clock driven by crystals.
The default internal Sample Rate of the AM713 is 48 kHz. This default internal rate can
be overridden with the Sample Rate button on the front panel of the AM713 (directly
below the Sample Rate LEDs) to 44.1, 48 or 96 kHz.
be overridden with the Sample Rate button on the front panel of the AM713 (directly
below the Sample Rate LEDs) to 44.1, 48 or 96 kHz.
2.6.2
MA703
The MA703 detects Sample Rate and Sample Rate Source like the AM713 with the
following differences:
following differences:
•
Since the MA703 is always a slave to an external Sample Rate Source, there is
no internal Sample Rate Source setting.
no internal Sample Rate Source setting.
•
The MA703 can use MADI in addition to AES or Word Clock as a Sample Rate
Source, and detects the presence of these signals in the following order: AES,
Word, MADI.
Source, and detects the presence of these signals in the following order: AES,
Word, MADI.
When a signal is detected, it immediately becomes the sample rate clock of the MA703.
The auto-sensed Sample Rate Source can be overridden with the Sample Rate Source
button on the front panel of the MA703, below the Sample Rate Source LEDs.
The auto-sensed Sample Rate Source can be overridden with the Sample Rate Source
button on the front panel of the MA703, below the Sample Rate Source LEDs.