West Bend BPE3CF - Blender Express 业主指南

下载
页码 32
To prevent personal injury or property damage, read and follow all instructions 
and warnings.
 
•  Never leave the house while the appliance is on. 
•  A short power-supply cord is provided to reduce risks resulting from becoming 
entangled in or tripping over a longer cord. 
•  Longer, detachable power-supply cords or extension cords are available and 
may be used if care is exercised in their use.  While use of an extension cord is 
not recommended, if you must use one, the marked electrical rating of the 
detachable power-supply cord or extension cord should be at least as great as 
the electrical rating of the appliance.  If the appliance is of the grounded type, the 
extension cord should be a grounding-type 3-wire cord.  The cord should be 
arranged so that it will not hang over the counter top or tabletop where it can be 
pulled by children or tripped over. 
•  After running the motor continuously for ninety seconds, wait at least three
 
minutes before running the motor again. 
•  This appliance has a polarized plug (one blade is wider than the other).  To 
reduce the risk of electric shock, this plug is intended to fit into a polarized outlet 
only one way.  If the plug does not fit fully into the outlet, reverse the plug.  If it 
still does not fit, contact a qualified electrician.  Do not attempt to modify the plug 
in any way. 
•  To reduce the risk of injury, never place cutter-assembly blades on base without 
blending mug properly attached. 
• For 
household 
use 
only
 
SAVE THESE INSTRUCTIONS 
 
USING
 
YOUR
 
BLENDER
 
EXPRESS
 
 
Before using your Blender Express
 wash all parts, 
except for the motor base, in 
warm, soapy water, rinse thoroughly and dry.  The gasket should not be removed 
from the blade base for cleaning.  Do not wash parts in the dishwasher. 
 
CONTROL BUTTONS:
 
PULSE - gives short bursts of power at high speed.  Use 
“PULSE” to begin the mixing of ice and other hard ingredients.
 
OFF - turns the appliance “OFF.” 
LOW - runs the appliance at low speed.  Use this speed for the 
initial 15 seconds of mixing. 
HIGH - runs the appliance at high speed.  Use this speed for 
the final stages of mixing.   
 
3