Bosch Appliances Home Security System LTC 8600 用户手册
LTC 8600 | LTC 8800 Series
en | 101
F.01U.127.393 | 2.0 | 2009.03
Instruction Manual
Bosch Security Systems, Inc.
•
Error 80 - Trunk not available
An attempt was made to access a remote camera connected to a satellite sys-
tem, but no unused trunk lines are currently available. Depending on system
configuration and certain user options, the operator's monitor may automati-
cally switch to the default camera programmed into the Start-up column of the
Monitor Table when this error occurs.
tem, but no unused trunk lines are currently available. Depending on system
configuration and certain user options, the operator's monitor may automati-
cally switch to the default camera programmed into the Start-up column of the
Monitor Table when this error occurs.
•
Error 81 - Satellite Trunk Seized
The camera currently viewed has changed because an operator with a higher
priority has selected a different camera that seized the trunk line from the satel-
lite. The operator's monitor will automatically be switched to the default cam-
era programmed into the Start-up column of the Monitor Table.
priority has selected a different camera that seized the trunk line from the satel-
lite. The operator's monitor will automatically be switched to the default cam-
era programmed into the Start-up column of the Monitor Table.
•
Error 89 - internal stack error
A stack overflow within the system has occurred. Report this to the manufac-
turer.
turer.
•
Error 90 - Keyboard entry undefined
The keyboard entry is not defined. Check the appropriate section of the instruc-
tion manual for the desired operation and try again.
tion manual for the desired operation and try again.
•
Error 92 - Keyboard entry out of range
The data entered for a valid command was not in the range allowed by the sys-
tem. Check the appropriate section of the instruction manual for the acceptable
ranges for the command in question and try again.
tem. Check the appropriate section of the instruction manual for the acceptable
ranges for the command in question and try again.
•
Error 94 - Keyboard entry invalid
An invalid character has been received from the keyboard. Usually this would
indicate a communications error. Verify that the keyboard-to-system cable is not
producing an intermittent connection.
indicate a communications error. Verify that the keyboard-to-system cable is not
producing an intermittent connection.
•
Error 95 - Keyboard entry incomplete
The control sequence sent from the keyboard was incomplete. Usually this
would indicate a communications error. Verify that the keyboard-to-system
cable is not producing an intermittent connection.
would indicate a communications error. Verify that the keyboard-to-system
cable is not producing an intermittent connection.
•
Error 96 - * (STAR) undefined
The
* key has been pressed, but there is no definition for this button.
Warning Messages
•
Hi/Low Temperature Alert
The Allegiant CPU is equipped with a temperature sensor. If the ambient CPU
temperature drops below -10 degrees C or goes above +55°C, an on-screen
“Temperature Alert” message will appear on the system monitors and the sys-
tem keyboards will begin to beep.
temperature drops below -10 degrees C or goes above +55°C, an on-screen
“Temperature Alert” message will appear on the system monitors and the sys-
tem keyboards will begin to beep.