Bosch Appliances Home Security System LTC 8600 用户手册
64 | en
LTC 8600 | LTC 8800 Series
Bosch Security Systems, Inc.
Instruction Manual
F.01U.127.393 | 2.0 | 2009.03
17.4.3 Lock or Unlock Control of a Monitor
•
When using IntuiKey keyboards, press [
Device Lockout], located on the main
Allegiant menu screen for these options.
•
With LTC 8555 Series keyboards, press
[Monitor], [Lock], then [ON] to lock a mon-
itor or
[OFF] to unlock the monitor. If the monitor to be unlocked is not the one
currently being controlled by the keyboard, enter the monitor number (but do
not press
not press
[Enter]) after you press [Monitor].
If the Status option is enabled, the section of the on-screen overlay between the
camera number and the time shows
M
L
indicating the monitor is locked. This status
prevents other operators from changing the video on the monitor being used
(unless they have a higher priority). Remember to unlock the monitor when finished
so other operators can access it. If an operator with a higher priority accesses a
locked monitor and switches to a different camera, the lock is automatically
removed.
(unless they have a higher priority). Remember to unlock the monitor when finished
so other operators can access it. If an operator with a higher priority accesses a
locked monitor and switches to a different camera, the lock is automatically
removed.
17.4.4 Recording a Camera Pre-position Scene
Select a camera with pan/tilt/zoom control and with preposition options. Using the
joystick and lens controls, adjust the camera to view the scene you wish to store.
When using IntuiKey keyboards, press [
joystick and lens controls, adjust the camera to view the scene you wish to store.
When using IntuiKey keyboards, press [
Camera Control], located on the main Alle-
giant menu screen to enter a menu screen with this option. Press
Set Shot [Set], then
select the scene number via the numeric keypad, and press
[Enter]. The camera
position is stored for recall later.
If an AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
If an Allegiant conventional receiver/driver is being controlled, the pan/tilt and
zoom lens must have the necessary options for pre-position operation. On certain
models of AutoDomes and Allegiant Receiver/Driver Series, it is possible to disable
a previously stored pre-position, or remove it from a pre-position tour, by pressing
Set Shot [Set], the digit 9, followed by the 2-digit pre-position number. Refer to infor-
mation supplied with the device to determine if it supports this feature.
zoom lens must have the necessary options for pre-position operation. On certain
models of AutoDomes and Allegiant Receiver/Driver Series, it is possible to disable
a previously stored pre-position, or remove it from a pre-position tour, by pressing
Set Shot [Set], the digit 9, followed by the 2-digit pre-position number. Refer to infor-
mation supplied with the device to determine if it supports this feature.
NOTE
Alarm activations are defaulted to call preposition scene 16.
17.4.5 Recalling a Camera Pre-position Scene
Select the camera to be activated. Press [
Shot], enter a previously stored camera
position number via the numeric keypad, then press
[Enter]. The camera automati-
cally returns to the previously stored position. If a second pre-position is called
prior to the completion of the first, the camera will move directly to the second
shot.
prior to the completion of the first, the camera will move directly to the second
shot.
If the AutoDome Series camera is being used, certain pre-position commands are
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
also used to activate operational features/functions. Refer to the AutoDome opera-
tion manual for complete information.
17.4.6 Activate/Deactivate Auxiliary Function
When using IntuiKey keyboards, press [
Camera Control], on the main Allegiant menu
screen to enter a menu containing these options. To turn on an auxiliary function of
a remote camera device, press
a remote camera device, press
Aux ON [ON], enter the number of the auxiliary you
would like to activate and then press
[Enter]. Holding the [Enter] key down causes the
auxiliary function to be sent repeatedly. This capability is useful when the auxiliary
is activating a housing window washer function, or a temporary light source.
is activating a housing window washer function, or a temporary light source.
To turn
OFF an auxiliary function of a remote camera device, press Aux OFF [OFF],
enter the number of the auxiliary you would like to deactivate and then press
[Enter].