Bolens BL250 服务手册

下载
页码 80
3
RULES FOR SAFE OPERATION
BEFORE OPERATING
• Read the instructions carefully. Be familiar with the controls
and proper use of the unit.
• Do not operate this unit when tired, ill or under the influ-
ence of alcohol, drugs or medication.
• Children under the age of 15 must not use the unit; teens
may operate the unit with adult guidance.
• Inspect the unit before use. Replace damaged parts. Check
for fuel leaks. Make sure all fasteners are in place and
secure. Replace cutting attachment parts that are cracked,
chipped or damaged in any way. Make sure the cutting
attachment is properly installed and securely fastened. Be
sure that the cutting attachment shield is properly
attached, and positioned as recommended. Failure to do so
can result in personal injury to the operator and
bystanders, as well as damage to the unit.
• Use only 0.095-inch (2.41 mm) diameter original equip-
ment manufacturer replacement line. Never use metal-rein-
forced line, wire, chain or rope. These can break off and
become dangerous projectiles. 
• Be aware of risk of injury to the head, hands and feet.
• Squeeze the throttle control and check that it returns auto-
matically to the idle position. Make all adjustments or
repairs before using the unit.
• Clear the area to be cut before each use. Remove rocks,
broken glass, nails, wire, string and other objects which
may be thrown or become entangled in the cutting attach-
ment. Clear the area of children, bystanders and pets; keep
them outside a 50-foot (15 m.) radius, at a minimum. Even
then, they are still at risk from thrown objects. Encourage
bystanders to wear eye protection. If you are approached,
stop the unit immediately.
• Add fuel in a clean, well-ventilated outdoor area where
there are no sparks or flames. Remove the fuel cap slowly,
and only after the engine stops. Do not smoke while fuel-
ing or mixing fuel. Wipe up any spilled fuel from the unit
immediately. 
SAFETY WARNINGS FOR GAS TRIMMERS
• Store fuel only in containers specifically designed and
approved for the storage of such materials.
• Always stop the engine and allow it to cool before filling
the fuel tank. Never remove the fuel tank cap or add fuel
when the engine is hot. Never operate the unit without the
fuel cap securely in place. Loosen the fuel tank cap slowly
to relieve any pressure in the tank. 
Read the Operator’s Manual(s) and follow all warnings and safety instructions.
Failure to do so can result in serious injury to the operator and/or bystanders.
FOR QUESTIONS, CALL  1-800-520-5520
• SAFETY SYMBOLS •
• IMPORTANT SAFETY INFORMATION •
READ ALL INSTRUCTIONS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and  their explanations, deserve
your careful attention and  understanding. The safety warnings do not by themselves eliminate any danger. The instructions or
warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
SYMBOL MEANING
NOTE:
Advises you of information or instructions vital to the operation or maintenance of the equipment.
Failure to obey a safety
warning can result in
injury to yourself and others. Always follow the
safety precautions to reduce the risk of fire, elec-
tric shock and personal injury.
WARNING:
Failure to obey a safety
warning will result in seri-
ous injury to yourself or to others. Always follow
the safety precautions to reduce the risk of fire,
electric shock and personal injury.
DANGER:
Failure to obey a safety
warning may result in
property damage or personal injury to yourself
or to others. Always follow the safety precau-
tions to reduce the risk of fire, electric shock and
personal injury.
CAUTION:
Indicates dan-
ger, warning
or caution. Attention is required in order to
avoid serious personal injury. May be used in
conjunction with other symbols or pictographs.
SAFETY ALERT:
Gasoline is highly flam-
mable and its vapors can
explode if ignited. Follow the ensuing precautions.
WARNING:
When using the unit, you
must follow the safety
rules. Please read these instructions before operat-
ing the unit in order to ensure the safety of the
operator and any bystanders. Please keep these
instructions for later use.
WARNING: