Raymarine 150/400 用户手册
10
Type 150/400 Autopilot System: Installation Guide
Ste
p
3.1 Select the location
Suitable locations
The course computer is designed to be mounted on a vertical and flat
bulkhead below decks. Select a location that is:
bulkhead below decks. Select a location that is:
•
dry, protected and well-ventilated
•
free from high operating temperatures
•
free from excessive vibration
•
non-metallic
•
accessible for cable routing and sufficiently large to secure the
cable clamp under the computer
cable clamp under the computer
On sailboats, we also recommend mounting the course computer
across the boat on a transverse bulkhead.
across the boat on a transverse bulkhead.
Notes:
1. If the only possible location has a metallic surface, you must
insulate the base of course computer so it is not earthed.
insulate the base of course computer so it is not earthed.
2. When selecting the mounting location, also refer to the EMC
installation guidelines (on page 7).
installation guidelines (on page 7).
Course computer – installation dimensions
277 mm (10.9 in)
288 mm (11.3 in)
307 mm (12.1 in)
70 mm
(2.8 in)
(2.8 in)
D5260-1
195 mm (7.7 in)
min 50 mm (1.9 in)
(recommended)
(recommended)
cable clearance:
min 50 mm (1.9 in)
(recommended)
min 50 mm (1.9 in)
(recommended)
26 mm
(1.0 in)
133 mm (5.2 in)
133 mm (5.2 in)
Keyhole slots
for No 8 screws
(pan-head)
for No 8 screws
(pan-head)
81173_3.book Page 10 Thursday, June 7, 2001 11:51 AM