Russound ST2 用户手册

22

A custom name can be assigned to each of the
six banks of both Tuner 1 and Tuner 2.

1. Enter the Setup Menu by pressing and holding
the TNR SEL button.
2. Press MEM Up/Down until BANK NAME
appears on the tuner.
3. Press BAND.
4. Press the Tune Up/Down buttons to select the
Tuner #. 
5. Press BAND to advance.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press BAND. BANK NAME appears again.

8. Press BAND to access the Bank Name entry
screen. 
9. Press Tune Up/Down to select a character
and MEM Up/Down to change a character posi-
tion. Up to 12 characters can be entered one by
one. A blinking LED block indicates the place-
ment of the character being entered. 
10. Press BAND when bank name is entered.
11. SAVE CHANGES will appear.
12. Press Tune Up/Down to select Yes or No.
13. Press BAND to save bank name. The Bank
Name menu returns to the Tuner # prompt to
name other banks, or press TNR SEL to exit the
Bank Name menu.

Press and Hold 

TNR SEL button

TUNER #

BANK #

BANK 

NAME

SAVE 

CHANGES?

TNR

SEL

Selects 

character

Selects 

character 

position

Repeat 

for each 

character 

in name

TNR

SEL

TNR

SEL

MEM 

NAME 

Procedure

BANK 

NAME 

Procedure

SOURCE 

NUM 

Procedure

Setup 
Menu

REGION 

Procedure

FACTORY 

INIT 

Procedure

UPDATE 

FIRMW 

Procedure

SYSTEM 

INFO 

Procedure