Ricoh IS300e 用户手册
Appendix
180
11
Cleaning
R WARNING:
R CAUTION:
We recommend periodically cleaning
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
Important
❒ Do not use volatile chemicals such
as benzene, paint thinner or spray
with insecticides. This can cause
deformation, discoloration and
cracking.
with insecticides. This can cause
deformation, discoloration and
cracking.
❒ Wipe off the Automatic Document
Feeder (ADF) with a dry, clean
cloth when there is dust or soiling
present inside.
cloth when there is dust or soiling
present inside.
Cleaning the Exposure Glass,
ADF Exposure Glass, White
Sheet, and White Plate
ADF Exposure Glass, White
Sheet, and White Plate
R CAUTION:
AAAA
Turn off the power of the scanner
and unplug the power cord from
the outlet.
and unplug the power cord from
the outlet.
BBBB
Wipe off the scanner with a dry,
soft cloth.
soft cloth.
1.
White Plate
2.
White Sheet
3.
ADF Exposure Glass
4.
Exposure Glass
• Never remove any covers or screws oth-
er than those specified in this manual.
The inside of the scanner contains high-
voltage components that can cause elec-
trical shock. Have all inspections, ad-
justments, and repairs inside the
scanner performed by an authorized
dealer only.
The inside of the scanner contains high-
voltage components that can cause elec-
trical shock. Have all inspections, ad-
justments, and repairs inside the
scanner performed by an authorized
dealer only.
• Do not attempt to modify this scanner in
any way. Modification can cause fire
orelectrical shock.
orelectrical shock.
• When disconnecting the power cord, al-
ways make sure to hold onto the plug.
Do not pull on the power cord itself.
This can cause damage to the cord, fire
or electrical shock.
Do not pull on the power cord itself.
This can cause damage to the cord, fire
or electrical shock.
• Be careful not to pinch your fingers
when closing the Automatic Document
Feeder (ADF).
Feeder (ADF).
ADG017S