Perle Systems 5500208-43 用户手册

IOLAN DS1/TS2 CLI Reference Guide, Version 4.3

16

Chapter 2

This chapter defines all the CLI commands associated with configuring the IOLAN’s server 
parameters.

Description You can create a custom application that can run on the IOLAN using the Perle SDK.
User Level Admin
Syntax

   

set custom-app server program-command-line <command>  

The name of the SDK program executable that has been already been downloaded to 
the IOLAN, plus any parameters you want to pass to the program. Maximum of 80 

characters. Use the 

 CLI command as described in the SDK Programmer’s Guide 

to manage the files that you have downloaded to the IOLAN. For example, using 
sample outraw program, you would type: 

 

if you were starting the application on the Server (notice the 

 parameter specifies 

Line 1).

Description Sets server parameters.
User Level Admin
Syntax

[bypass-password on|off] [domain <string>]  
[flush-on-close on|off] [internet <IPV4_address>]  
[internet dhcp/bootp on|off] [internet mtu <integer>] 
[monitor-connection-every <seconds>][monitor-connection-timeout 
<seconds>][monitor-connection-number <integer>][name <string>]  
[netmask <IPV4_address>][oem-login on|off]  
[password-limit <0-10>] [prompt-with-name on|off]  
[single-telnet on|off][data-logging-buffer-size 
<integer>][pre-v4.3g-data-logging on|off]

When DHCP/BOOTP is enabled, you can enable this option to have the IOLAN receive 

the Default Gateway IP address from the DHCP/BOOTP server.