Toshiba TDP-EX20 业主指南

下载
页码 50
10
11
Bef
ore Using
POWER SUPPLY INFORMATION
If your line voltage is 220 to 240V, use one of the following types of cable/plug.
Plug
configuration Plug type
Australian
240V
10A
North American
240V
15A
Switzerland
240V
6A
Line voltage
EURO
UK
220 – 240V
220 – 240V
200 – 240V
200 – 240V
200 – 240V
Plug
configuration
Plug type
Line voltage
Use a 5A fuse which is approved by ASTA 
or BSI to BSI362.
Always replace the fuse cover after 
changing the fuse.
IMPORTANT PRECAUTIONS
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location. 
When the unit is exposed to such a change in temperature, moisture may condense on the 
lens and the crucial internal parts. To prevent the unit from possible damage, do not use 
the unit for at least 2 hours when there is an extreme or sudden change in temperature.
Place and Manner of Installation
Do not place in hot locations, such as near heating equipment.  Doing so could cause 
malfunction, and shorten the life of the projector.
Avoid locations with oil or cigarette smoke.  Doing so will dirty the optical parts, shortening 
their lives, and darkening the screen.
Do not use this product in the upright position or tilt it up or down by more than 20° from 
level. Doing so may cause a failure or shorten the life of the product.
Using this instrument near a TV or radio may cause interference to the images or audio 
sound. If this happens, move it away from the TV or radio.
In a high altitude location where air is thin, cooling efficiency is reduced so use the 
projector with [Fan mode] set to [High]. 
Only plug the power cord into outlets rated for use with the power cord’s specified voltage 
range. Do not overload extension cords or table taps as this can result in fire or electric 
shock.
Route the power cable or the connecting cable away from where people could trip over it. 
The projector may fall down, which could result in severe injury.
Be sure the power cord is easily reached for unplugging in case of emergency. Do not 
place any obstacles near a wall outlet in which the cord is plugged.
IMPORTANT PRECAUTIONS (Continued)
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit.  Do not leave rubber or 
plastic products touching the unit for a long time.  They will leave marks on the finish.
Do not use a chemically saturated cloth.
EXEMPTION CLAUSES
Toshiba Corporation bears no responsibility in the case of damages arising from natural 
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts 
by third parties, other accidents, or use under abnormal conditions including erroneous or 
improper operation and other problems.
Toshiba Corporation bears no responsibility for incidental damages (lost profit, work 
interruption, corruption or loss of the memory contents, etc.) arising from the use of or the 
inability to use this unit.
Toshiba Corporation accepts no liability whatsoever for any damages arising from not 
having followed the descriptions in this Instruction Manual.
Toshiba Corporation accepts no liability whatsoever for any damages arising from 
malfunctions arising from combination with equipment or software that is not related to 
Toshiba Corporation.
Toshiba bears no responsibility for information being intercepted or leaked due to the use 
of a wireless LAN, or any damages therefore.
In the spaces provided below, record the Model and Serial No. located at the bottom of 
your  projector.
Model No.  
 
 
Serial No. 
 
Retain this information for future reference.