Oricom S6000 用户手册

 
External ringer melody (handset and base): MELODY 1 
Internal ringer melody (handset): MELODY 2 
Handset Ring Volume: 

 

Base Ring Volume: 

 

Receiver Volume: Med 
Flash Timing: FLASH 1 
Dial Mode: Tone 
Auto Answer: On 
Key Beep Tone: On 
Confirmation Tone: On 
Charging Tone: On 
Backlit (if applicable): On 
Call Timer: On 
Message Waiting Indicator: Off 
Monitor:  Off 
Direct Dial function: Off 
Direct Dial number: Empty 
Prefix Dialling: Off 
Prefixes and numbers: Empty 
Call Barring:  Off 
Call bar and exempt numbers: Empty 
Operator services: Default services 
Base Selection:  Auto 
PIN Code:  0000 (for base menu) 
SMS Service: ON 
Service centre numbers: Pre-programmed # 
Active service centre: Service centre 1 
Sub-Address: 0 
SMS Alert Tone: On 
Handset Name:  ORICOM 
Language: English 

 

 
 
 
    
 
 

 
The phone does not work at all 

•  Make sure that adapter and phone cord are connected properly.   

•  Check that the batteries are fully charged and installed properly. 

•  Check that the handset is correctly registered to the same base 

unit. 

•  Move the handset closer to the base unit. 
 
The phone does not ring 

•  Make sure the adapter and the phone cord are connected properly. 

•  Move the handset closer to the base unit. 

•  Check that the handset is correctly registered to the same base 

unit. 

•  Make sure the handset (or base) ringer is turned on. 
 
The phone does not dial out 

•  Check that the phone cord is connected properly. 

•  Check the handset is fully charged. 

•  Check that the handset is correctly registered to the same base 

unit. 

•  The dialled number may be barred. See Call Barring section 

•  The keypad may be locked. See Handset Keypad Lock/Unlock 

section. 

 
CID does not work properly 

•  Check with your local phone company that the CID service is 

subscribed to. 

•  Let the phone ring at least once before answering. 
 
The CIDCW call cannot be answered 

•  Check with your local phone company and select the correct recall 

duration. 

 
Base charge light does not work 

•  Make sure that adapter is connected properly.   

•  Make sure the handset is making contact in the cradle. 
 
The empty battery icon appears soon after the batteries are charged 

•  Replace the batteries with new ones. 

40 of 42