KVH Industries TracPhone V7 用户手册

21

Now that you have installed the system, you can 
test the system to verify it is ready for customer 
delivery. Follow the steps below to test the 
system for proper operation.

a. With the TracPhone system powered on, 

restart the customer’s networked 

computer(s).

b. Make sure the control unit display indicates 

the system is “Online.”

c. If the customer has activated the TracPhone 

system for mini-VSAT Broadband service, 

verify that the system can access the Internet. 

(Enter any common website address (URL) 

into the browser.)

d. If the customer has activated the TracPhone 

system for VoIP service, also verify that you 

can place a VoIP call via the TracPhone 

system. (Using any telephone connected to 

the MTA, place a call to someone on a 

terrestrial or cellular network and ask that 

person to call you back at the customer’s 

VoIP number.) 

e. Even if the customer has not yet activated the 

TracPhone system for mini-VSAT Broadband 

service, you can still check the modem’s 

communications to the land-based hub. Open 

the web browser on any networked computer 

and enter the corresponding web address for 

the currently tracked satellite:

Verify that the hub’s test web page appears in 

the browser (similar to the page shown in 

Figure 45). Run the speed test on this page 

several times and ensure it reports within 

70% of advertised speeds, on average.

22°W (NSS7)

72°W (AMC6)

http://204.14.40.60

8°W (Atlantic Bird2)

http://204.14.40.60

Figure 44:  Technician Testing the TracPhone V7 System

Figure 45:  Hub Test Web Page

Test the System

14