KVH Industries TracPhone V7 用户手册

3

Before you begin, follow these steps to make sure 
you have everything you need to complete the 
installation.

a. Unpack the box and ensure it contains 

everything shown in Figure 1 and on the 

Kitpack Content Lists. Save the packaging for 
future use.

b. Carefully examine all of the supplied parts to 

ensure nothing was damaged in shipment.

c. Gather all of the tools and materials listed 

below. You will need these items to complete 

the installation.

• Flat-head and Phillips-head screwdrivers

• Electric drill and 1/2" (13 mm) bit

• 3" (80 mm) hole saw

• Wire  cutters

• Socket wrenches and extension

• 7/16" open-end wrench

• Light hammer and center punch

• Adhesive  tape,  scriber or pencil

• Wire strippers and terminal lug crimper

• Two RF coax cables (see Figure 20 on 

• Connector  installation tools 

• Laptop computer with Windows

®

 Vista 

or XP installed

Radome

Baseplate

Figure 1:  TracPhone V7 System Components

Always lift the antenna by the baseplate and 

never by the radome or any portion of the 

internal antenna assembly (see Figure 1).

Inspect Parts and Get Tools

1