KVH Industries TracPhone V7 用户手册

8

If you plan to mount the control unit and modem 
separately, follow these steps to detach the 
control unit from the modem, attach the strain-
relief brackets, and attach the “L” mounting 
brackets.

a. Remove the 12 #6-32 screws and washers 

securing the rack-mount brackets to the front 

of the control unit and modem (see Figure 9 

b. Remove the 16 #6-32 screws and washers 

securing the four metal retaining straps to the 

control unit and modem (see Figure 12). 

Remove the straps.

c. Attach a strain-relief bracket to the back of 

the control unit using four of the screws and 

washers you removed in Step b (see

d. Attach a second strain-relief bracket to the 

back of the modem using four of the screws 

and washers you removed in Step b (see 

e. Attach two of the supplied “L” brackets to 

the sides of the control unit using four #6-32 

screws and washers (see Figure 11 on page 7). 

You can attach the brackets at either the top 

or bottom of the control unit, depending on 

your desired mounting location.

f. Attach the two other supplied “L” brackets to 

the sides of the modem using four #6-32 

screws and washers (see Figure 11 on page 7). 

You can attach the brackets at either the top 

or bottom of the modem, depending on your 

desired mounting location.

g. Once you have completed all system wiring, 

mount the control unit and modem to the 

vessel using fasteners appropriate for the 

mounting surface.

#6-32 Screw (x16)

#6 Washer (x16)

Strap (x4)

Mode

m

Control Unit

Figure 12:  Detaching the Retaining Straps

#6 Washer (x4)

#6-32 Screw (x4)

Strain-Relief
Bracket

Tie-wrap

Holes (x12)

Control Unit

Figure 13:  Attaching the Bracket to the Control Unit

#6 Washer (x4)

#6-32 Screw (x4)

Strain-Relief
Bracket

Tie-wrap
Holes (x12)

Modem

Figure 14:  Attaching the Bracket to the Modem

Prepare the Belowdecks Units

4

Option 3 - Mounting Units Separately