Emerson Liebert MC Microchannel Outdoor Condenser 28 - 220kW 用户手册
Inspection and Installation
Liebert
®
MC
™
12
3.0
I
NSPECTION
AND
I
NSTALLATION
3.1
Equipment Inspection
Before unpacking the condenser, verify that the labeled equipment matches the bill of lading.
Carefully inspect all items for damage, either visible or concealed. Report any damage immediately to
the carrier and your local Emerson representative. File a damage claim with the carrier and send a
copy to your local Emerson representative.
3.1.1 Packing Material
All material used to package this unit is recyclable. Save it for future use or dispose of the material
appropriately.
SAFETY INFORMATION
NOTICE
Risk of overhead interference. Can cause unit and/or structure damage.
Refer to the installation plans before moving the unit to verify clearances.
Refer to the installation plans before moving the unit to verify clearances.
NOTICE
Risk of improper forklift handling. Can cause unit damage.
Keep the forklift tines level and at a height that will fit under the skid.
Keep the forklift tines level and at a height that will fit under the skid.
NOTICE
Risk of improper storage. Can cause unit damage.
Keep unit upright and protected from contact damage.
Keep unit upright and protected from contact damage.
!
WARNING
Risk of improper handling. Can cause equipment damage, injury or death.
Read all of the following instructions before attempting to move, lift, remove packaging from
Read all of the following instructions before attempting to move, lift, remove packaging from
or preparing unit for installation.
!
WARNING
Risk of heavy condenser falling or tipping over. Can cause property damage, serious injury or
death.
Confirm that all components of the lifting system are rated for the weight of the condenser by
Confirm that all components of the lifting system are rated for the weight of the condenser by
an OSHA Certified rating organization before attempting to lift and/or move the condenser.
See 2.2 - Dimensions and Weights for the condenser weights.
!
CAUTION
Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury.
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,
shoes, and glasses should attempt to move, lift, remove packaging from or prepare unit for
installation.