Creative 2030 用户手册
Troubleshooting B-2
In Windows XP
1. Click Start -> Control Panel.
2. Double-click the System icon. The System Properties dialog box appears.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click the plus sign next to Universal Serial Bus controllers. The name of the
2. Double-click the System icon. The System Properties dialog box appears.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click the plus sign next to Universal Serial Bus controllers. The name of the
controller bus appears. Be sure that there is no red “X” or yellow “!” next to it.
The red “X” or yellow “!” signs indicates incorrect or incomplete installation.
6. Click any items with the red “X” or yellow “!”, and then click the Remove button.
7. Reinstall the drivers for Wireless LAN USB Adapter. For more information, see
7. Reinstall the drivers for Wireless LAN USB Adapter. For more information, see
Problems with
Software
Software
The Configuration Utility icon on the status bar is always red.
Do the following:
❑ If you are in Infrastructure mode, be sure that your computer and the access
❑ If you are in Infrastructure mode, be sure that your computer and the access
point have the same SSID and WEP settings. The SSID is case sensitive. See
❑ If you are in Ad-hoc mode, be sure that all the wireless stations use the same
SSID, channel, and WEP settings.
❑ Make sure that all the wireless stations are within range of each other.
❑ Restart the access point.
❑ Restart your computer.
❑ In the Advanced tab (see “Advanced Settings” on page 4-6), make sure that
Shared or Auto is selected in the Authentication Type box.