Fortec Car Satellite Radio System FS-4300 用户手册

Suppose that you have selected Moter 

Antenna in the Antenna Connection window.

1. LNB Type: Select the proper LNB type.

2. Motor Type: Select between DiSEqC1.2 

and USALS. If you select DiSEqC1.2, the 

following Local Longitude and Local Latitude 

items will turn grey.

3. Delete All: Press OK  key to pop up the 

dialogue "Are you sure to clear set satellite 

position of this tuner?". Press OK key at the 

Yes button to clear all the memories about 

the position of the satellites that has 

connected to the current turner.

4. Motor Setting: Press OK  key to the Motor 

Setting window.

Satellite:  Press              keys to select the 

satellite in circle. Or press OK key to pop up 

the drop-down list, then select  the desired 

satellite in the list and press OK key to 

confirm.

Transponder: The same operation as the 

above.

Position No., & Save: The range is from 0 to 63.  "0" delegates the original position. 

You can select the proper value when you has rotated the  antenna.

Go to X: Press OK key to pop up the drop-down list, select the proper position 

(reference or from 1to 63) to realize the selected position.

West <Save> East: Press          key to turn west, while press         key to turn east. 

Press  OK key to pop up the dialogue "Are you sure to change this satellite's 

position?". Press OK key at the Yes button to save the current position, or press OK 

key at the No button to cancel the operation.

Recalculation: Press OK  key to pop up the dialogue "Are you sure to change this 

satellite's position?". Press OK key at the Yes button to recalculation.