LG M2450D 用户手册

I can see a swirling oil-like pattern on the Monitor set when the Monitor set is turned off.
This is caused by the interference of external light in the air layer between the LCD surface and 3D filter.

The pattern becomes almost invisible when you turn on the power again.

If you are not using the glasses

provided with the monitor.

When you view 3D images with this monitor, it is very important that you use

the glasses provided with the monitor. The glasses are designed to compensate

optically for the 3D filter attached to the surface of the monitor. If you wear third-

party glasses, you may not see 3D images properly on the monitor.

If you view 3D images outside the

optimal viewing angle or distance.

The optimal viewing angle of this monitor is between 12° degrees; the optimal

viewing distance is between 50 cm to 90 cm from the monitor. When you view 3D

images outside the optimal viewing angle or viewing distance, the images may

look overlapped or not be displayed properly in 3D.

When switching the 2D image

display to the 3D image display

with the 3D button on the remote

control, the overlapped image may

be displayed.

y

Disable the 3D imaging mode with the 3D button.

y

The 3D imaging mode is disabled automatically if you change the channel.

If the screen is divided into left/right

or top/bottom when you change the

channel

This channel supports the 3D imaging mode. Select the 3D imaging type

displayed on the screen by pressing the 3D button on the remote control.

If your eyes are sore or the screen

looks blurry while viewing 3D

images.

Select Left/Right or Right/Left option, which you find better for viewing 3D

images.