Bosch Appliances Home Security System DS7400XIV4-EXP 用户手册

DS7400XiV4-EXP | User Guide | 6.0   Day to Day Operations 

EN | 8 

 

 

Bosch Security Systems | 6/05 | 4998154961B 

 

6.1.2 

Perimeter Instant Arming 

Use perimeter instant arming to arm only the exterior (perimeter) zones when you remain in the building. An exit 
delay is in effect, but no entry delay is in effect so an alarm 

does occur upon entry.  

The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green 
LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 
6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14). 

 

Table 4:  Perimeter Instant Arming 

 

 

 

 

Equipment  

Command Sequence 

What Happens 

What To Do 

Text Keypad LED 
Keypad 

[PIN][No Entry]  
[Perimeter Only] 

•  The red Armed LED flashes. 

•  “Perimeter Inst.” is displayed. * 

•  “Exit Now” is displayed during exit-delay. * 

•  The green Status LED lights steady. 

•  A single beep sounds. 

•  The red Armed LED lights steady when 

the exit-delay period ends. 

•  The yellow Perimeter LED lights steady. ** 

•  Only exterior protection zones are armed. 

•  Move freely around the 

interior. 

•  Opening any exterior 

door or window triggers 
an alarm. 

RF3341 Keypad 

[PIN][#][2] 

•  The LED flashes indicating a signal was 

sent to your security system. 

•  Only exterior protection zones are armed. 

•  Move freely around the 

interior. 

•  Opening any exterior 

door or window triggers 
an alarm.  

RF3332/RF3332E, 
RF3334/RF3334E 

Not applicable 

* Text Keypad only 

** LED Keypad only