Behringer Xenyx 1002B 用户手册

XENYX 1002B User Manual

1. Before you get started

1.1 Shipment

Your XENYX 1002B was carefully packed at the factory and the packaging is

designed to protect the unit from rough handling. Nevertheless, we recommend

that you carefully examine the packaging and its contents for any signs of

physical damage which may have occurred during transit.

◊

If the unit is damaged, please do NOT return it to BEHRINGER,
but notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be granted.

◊

We recommend that you use a flight case, so as to give your power
mixer optimum protection during use or transport.

◊

Always use the original packing carton to prevent damage during
storage or transport.

◊

Make sure that children cannot play unsupervised with the device
or its packaging.

◊

Please ensure proper disposal of all packing materials.

1.2 Online registration

Please register your new BEHRINGER equipment right after your purchase

by visiting http://behringer.com and read the terms and conditions of our

warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it

repaired as quickly as possible. To arrange for warranty service, please contact

the BEHRINGER retailer from whom the equipment was purchased. Should your

BEHRINGER dealer not be located in your vicinity, you may directly contact

one of our subsidiaries. Corresponding contact information is included in

the original equipment packaging (Global Contact Information/European

Contact Information). Should your country not be listed, please contact the

distributor nearest you. A list of distributors can be found in the support area

of our website (http://behringer.com).
Registering your purchase and equipment with us helps us process your repair

claims more quickly and efficiently.

Thank you for your cooperation!

1.3 Basic operation

The XENYX 1002B is easy to use. Simply follow these steps to achieve the best

possible sound:
1. Plug the included power cable into the back of the mixer. Plug the other end

of the cable into a mains outlet. DO NOT turn the mixer on yet.

2. Make all appropriate audio connections:

•

Connect microphones to the MIC jacks using XLR cables

•

Connect line-level sources to the LINE IN jacks using ¼" TS cables

•

Connect stereo sources (keyboard, drum machine) to one of the
stereo LINE IN jacks using a pair of ¼" TS cables

•

Connect a CD player to the 2 TRACK INPUT using ¼" or RCA cables

•

See Applications chapter for more details and options

3. Connect a monitoring source or speaker system. You may connect

powered studio monitors, powered loudspeakers or a power amp to the

MAIN OUTPUT jacks. You may also connect a pair of headphones to the

PHONES jack. Leave powered speakers and/or power amps turned off until

the mixer has been powered on.

4. Turn all PAN/BAL and EQ knobs to their center (12 o’clock) position.

Set all other knobs and faders all the way down/off.

5. Once all connections have been made, you may turn the mixer on.
6. After the mixer is turned on, you may also turn the speakers or

power amp on.

7. Set the input gain level for each channel using the GAIN knob. While testing

the audio source, turn the GAIN knob as high as possible without allowing

the CLIP LED to light. See the Gain Setting section for details.

8. Raise the MAIN fader to 0. You may adjust it further as you begin

to set levels.

9. Adjust all channel volume faders until you achieve a balanced mix.
10. Make sure that the channel CLIP LEDs and MAIN CLIP LEDs do not

light frequently. If this happens, adjust the respective GAIN or MAIN

fader accordingly.

11. Congratulations! You have now set up a basic mix! The 1002B offers many

other cool features as well, so continue through the manual to make the

most out of this powerful little mixer.