Whirlpool MED7000AW 手册

9

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Load Size Recommendations
For best results, follow the load size recommendations noted  

for each cycle. 

Small load: Fill the dryer drum with 3–4 items, not more than 

1/4 full. 

Medium load: Fill the dryer drum up to about 1/2 full. 

Large load: Fill the dryer drum up to about 3/4 full.  

Do not overload. Items need to tumble freely.

†

  You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature 

settings.

†

  You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature 

settings.

Adjusting drying time on Timed Cycles

When you select a Timed  

Cycle, the default time appears 

in the display. Use the + and – 

buttons to increase or decrease 

the time in 1-minute increments. 

Touch and hold to change the time in 5-minute increments. 
The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such 

as towels and work clothes.
A Low to Medium heat setting may be used for drying  

medium-weight items such as sheets, blouses, dresses,  

underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic,  

or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various 

loads, refer to the care label directions.

 

Items to dry:

 

Cycle:

Drying 

Temperature:

Default 

Time:

Available 

Options:

 

Cycle Details:

Any load NOTE: 

Select Air Only to 

dry foam, rubber, 

plastic, or heat-

sensitive fabrics. 

Timed Dry

High 

Medium 

Low 

Extra Low 

Air Only

40

Wrinkle Prevent

†

Use to dry items to a damp level for items that do 

not require an entire drying cycle. Select a drying 

temperature based on the type of fabrics in your 

load. If you are unsure of the temperature to select 

for a load, select the lower setting rather than the 

higher setting. 

Small loads and 

sportswear

Rapid Dry

High 

Medium 

Low 

Extra Low 

Air Only

18

Wrinkle Prevent

†

For small loads of 3–4 items.

Items  

to refresh:

 

Cycle:

Drying 

Temperature:

Default 

Time:

Available 

Options:

 

Cycle Details:

Shirts, blouses, 

and slacks

Refresh

Medium

15

Wrinkle Prevent

† 

Reduce Static

Use to reduce light wrinkles from loads left in the 

dryer too long. Do not add dryer sheets. 

Mixed Loads

Custom Refresh 

(on some 

models)

High  

Medium

16–25 

depending 

on number 

of garments 

selected

Wrinkle Prevent

† 

Reduce Static

Use to smooth out wrinkles and reduce odors from 

loads consisting of one to 9 dry items of wrinkle-

free cotton, cotton-polyester blend, common knits, 

and synthetic garments. Select 1-3, 4-6, or 7-9 

garments. The time will adjust with your selection.