Weed Eater WE261 用户手册

16

IMPORTANT:  Do not oil or grease the pivot 

points which have special nylon bearings.  

Viscous lu bri cants will attract dust and dirt 

that will short en the life of the self-lu bri cat ing 

bearings.  If you feel they must be lu bri cat ed, 

use only a dry, pow dered graphite type lu-

 bri cant spar ing ly.

The warranty on this riding mower does not 

cover items that have been subjected to 

operator abuse or negligence.  To receive 

full value from the warranty, operator must 

main tain riding mower as instructed in this 

manual.
Some adjustments will need to be made 

periodically to properly maintain your riding 

mower.
At least once a season, check to see if 

you should make any of the adjustments 

described in the Service and Adjustments 

section of this manual.
•  At least once a year you should replace 

the spark plug, clean or replace air filter, 

and check blade and belt for wear.  A new 

spark plug and clean air filter assure proper 

air-fuel mixture and help your engine run 

better and last longer.  

1.  Check engine oil level.

2.  Check brake operation.

3.  Check tire pressure.

4.  Check operator presence and 

 

ROS systems for proper operation.

5.  Check for loose fasteners.

/ILª$RIVEª#HAINS

ª ª#HANGEªMOREªOFTENªWHENªOPERATINGªUNDERªAªHEAVYªLOADªORªINªHIGHªAMBIENTªTEMPERATURES

ª ª3ERVICEªMOREªOFTENªWHENªOPERATINGªINªDIRTYªORªDUSTYªCONDITIONS









ª ª2EPLACEªBLADEªMOREªOFTENªWHENªMOWINGªINªSANDYªSOIL





)NSPECTª-UFFLER3PARKª!RRESTER

#LEANª!IRª&ILTER

2EPLACEª!IRª&ILTERª0APERª#ARTRIDGE

2EPLACEª3PARKª0LUG

#HECKª%NGINEª/ILª,EVEL

#LEANª%NGINEª#OOLINGª&INS

#LEANª!IRª3CREEN

#HANGEª%NGINEª/ILª

#HECKª"RAKEª/PERATION

#HECKª4IREª0RESSURE

#LEANª"ATTERYªANDª4ERMINALS

#HECKªFORª,OOSEª&ASTENERS

#HECK2EPLACEª-OWERª"LADE

#HECKª4RANSAXLEª#OOLING

,UBRICATEª!XLESªANDª3PINDLES

#HE

#HECKª/PERATORª0RESENCEªª2/3ª3YSTEMS

CKª6 "ELT

#HECKª-OWERª,EVELNESS

25

1 Out of fuel.

1 Fill fuel tank.

2 Bad spark plug.

2 Replace spark plug.

3 Dirty air filter.

3 Clean/replace air filter.

4 Water in fuel.

4 Empty fuel tank and carburetor, 

refill tank with fresh gasoline and 

replace fuel filter.

5 Loose or damaged wiring.

5 Check all wiring.

6 Engine valves out of adjustment.

6 Contact a qualified service center.

1 Dirty air filter.

1 Clean/replace air filter.

2 Bad spark plug.

2 Replace spark plug.

3 Weak or dead battery.

3 Recharge or replace battery.

4 Stale or dirty fuel.

4 Empty fuel tank and refill tank 

with fresh, clean gasoline.

5 Loose or damaged wiring.

5 Check all wiring.

6 Engine valves out of adjustment.

6 Contact a qualified service center.

1 Clutch/brake pedal not depressed. 1 Depress clutch/brake pedal.
2 Deck clutch is engaged.

2 Disengage deck clutch.

3 Weak or dead battery.

3 Recharge or replace battery.

4 Blown fuse.

4 Replace fuse.

5 Corroded battery terminals.

5 Clean battery terminals.

6 Loose or damaged wiring.

6 Check all wiring.

7 Faulty ignition switch.

7 Check/replace ignition switch.

8 Faulty solenoid or starter.

8 Check/replace solenoid or starter.

9 Faulty operator presence switch(es). 9 Contact a  qualified service center.

1 Weak or dead battery.

1 Recharge or replace battery.

2 Corroded battery terminals.

2 Clean battery terminals.

3 Loose or damaged wiring.

3 Check all wiring.

4 Faulty solenoid or starter.

4 Check/replace solenoid or starter.

1 Cutting too much grass/too fast.

1 Raise cutting height/reduce speed.

2 Build-up of grass, leaves and trash 

under mower.

2 Clean underside of mower 

housing.

3 Dirty air filter.

3 Clean/replace air filter.

4 Low oil level/dirty oil.

4 Check oil level/change oil.

5 Faulty spark plug.

5 Clean & regap or change spark plug.

6 Stale or dirty fuel.

6 Empty fuel tank and refill tank 

with fresh, clean gasoline.

7 Water in fuel.

7 Empty fuel tank and carburetor, 

refill tank with fresh gasoline. 

8 Spark plug wire loose.

8 Connect & tighten spark plug wire.

9 Dirty engine air screen/fins.

9 Clean engine air screen/fins.

10 Dirty/clogged muffler.

10 Clean/replace muffler.

11 Loose or damaged wiring.

11 Check all wiring.

12 Engine valves out of adjustment. 12 Contact a qualified service center.

1 Worn, bent or loose blade.

1 Replace blade. Tighten blade 

bolt.

2 Bent blade mandrel.

2 Contact a qualified service center.

3 Loose/damaged part(s).

3 Tighten loose part(s). 

Replace damaged parts.