Toshiba Strata CIX 开发者指南

e Mail

Con

fig

uratio

Voice Mail Configuration

Telephone Systems

Strata CIX Voice Mail Programming 01/07

3-9

Integration Dial Codes

Voice mail controls certain actions on your telephone system by using defined
telephone system dial codes. To define the dial codes, you must modify a telephone
system dial code parameter(s).
With this option, preset dial codes for other manufacturers’ systems can be enabled
or modified. The following fields display on the screen:

Dial code to put a caller on transfer hold

Dial code to use when there is no transfer dial tone

Dial code to return to caller after Ring No Answer

Dial code to return to caller after Busy

Dial code to use after call screening reject

Dial code to connect the caller to the extension

Number of milliseconds to wait for dial tone detection

Number of milliseconds delay after flash hook

Which DTMF tone to listen to for answer detection

Which DTMF tone to listen to for hangup detection

What to dial AFTER dialing the user ID extension

What to dial BEFORE dialing the user ID extension

What to dial when the system first starts up

What to dial when the system performs a shutdown

What to dial when a port goes off-hook

Number of minimum milliseconds to define CPM silence

Number of minimum milliseconds to define CPM sound

Message lamp ON

Message lamp OFF

Trunk access code

Number of milliseconds to use for Flash time

CIX/CTX IP Address — Enter IP address assigned to the Strata CIX (LCTU)

Simple Network Management Protocol (SNMP) Community — Enter the
community name that has been assigned in the target Strata CIX.

IPU IP Address — change address to the one assigned to the Strata CIX (LIPU))

Note If an LIPX is installed, enter the IP of the LIPU.

Table 3-2

Telephone Systems Tab Screen Fields (continued)

IELD

ESCRIPTION