Nortel Networks 822p 用户手册

If your projector is connected to a network, you can use a standard 
web browser to monitor and control it. When using a browser to 
access the projector, you cannot connect through a proxy server.

1. Make sure that the projector is connected to your network, as 

2. Follow the instructions on page 58 to set 

Standby Mode

 to 

Network On

 in the Extended menu so you can monitor the 

projector in standby mode. 

3. Open your web browser and enter the IP address of the projector 

you want to monitor in the browser window.

If you’re not sure what the address of the projector is, turn the 
projector on and select 

Wired LAN

 from the Network menu to 

display the IP address of the projector. See page 92.

You see a login screen.

4. Do one of the following:

■

If you didn’t set a Web Control Password in the Network 
menu, click 

OK

.

■

If you set a Web Control password in the Network menu, 
enter it in the 

Password

 box, then click 

OK

.

You see a screen displaying the settings you can change.

5. Select one of the menu options, then change any settings as 

needed. These settings correspond to those found in the 
projector’s menu system. See page 50 for details.

You cannot change the 

User’s Logo

, 

High Altitude Mode

, and 

Language

 settings in the Extended menu or select the 

Reset All

 and 

Reset Lamp Hours

 in the Reset menu

Use the controls at the bottom of the screen to choose a source, stop 
the action, turn off the picture and sound, or turn the projector’s 
power on or off.