Mitel 5540 用户手册
J=R=J
Hotel/Motel Features
You can do all of the following from an idle console or while connected
to a guest room.
If the console is idle, start here...
•
Press the Guest Services firmkey.
•
Dial the room number.
Listing/Counting Rooms by Occupancy and
Condition Status
You can display a list of rooms by occupancy and condition status—
for example, Vacant and Not Clean, or Occupied and Maid Present.
The system also reports the total number of rooms that are in the state
The system also reports the total number of rooms that are in the state
you specify. You can cycle through all rooms or start with a particular
room number—for example, all vacant and clean rooms on the third
floor.
To list all rooms by occupancy and condition status:
•
Press the Guest Services firmkey.
•
Do one of the following:
- To list all vacant and clean rooms, press [Vac/Clean].
- To list all rooms in which a maid is present, press [Maid].
- To list all rooms in another state (for example, vacant and not
- To list all vacant and clean rooms, press [Vac/Clean].
- To list all rooms in which a maid is present, press [Maid].
- To list all rooms in another state (for example, vacant and not
clean), press [Occupancy] repeatedly until the state you
want appears in the "Occup" field, and then [Condition] to
select the condition state.
want appears in the "Occup" field, and then [Condition] to
select the condition state.
•
Press [Enter] to display the first 10 rooms in the state you
specified.
specified.
To see more information about a room, use the cursor control keys to
select it, and then press the [Select] softkey.
To display a list of rooms beginning with a particular room
number:
•
Press the Guest Services firmkey.
•
Select Occupancy and Condition states as described above.
•
Enter a room number -- for example, 70.
•
Press [Enter] to display a list of rooms beginning with room 70.
•
Press the [Room Number] softkey.
•
Dial the number of the first of the rooms you want to display.
If the console is connected to the room, start here...
Changing Room Occupancy and Condition Status
•
Changing Room Occupancy and Condition Status
•
Press the [Status] softkey.
•
Press the softkey that corresponds to the state you
want to set—for example, to change a room from vacant to occu-
pied press the [Occupied] softkey.
want to set—for example, to change a room from vacant to occu-
pied press the [Occupied] softkey.
Setting and Canceling Wake-up Calls
•
Press the [Wake-up] softkey.
•
Do one of the following:
- To set a wake-up call time, enter the four-digit time in 12- or
- To set a wake-up call time, enter the four-digit time in 12- or
24-hour format. If you entered the time in 12-hour format,
press [A
press [A
M
] pr [P
M
].
- To cancel a wake-up call, press [Clear Time].
- To change a wake-up call time or correct an entry error, press
- To change a wake-up call time or correct an entry error, press
[Clear Time] and then re-enter the time.
•
Press [Set].
•
Press [Exit].
Setting and Canceling Do Not Disturb
•
Press the [No Disturb] softkey to set or clear Do Not Disturb.
Setting and Canceling Message Waiting
•
Press the [Msg Waiting] softkey to set or clear the message wait-
ing indicator on the room phone.
ing indicator on the room phone.
Setting Room Call Restrictions
•
Press the [Status] softkey.l
•
Do one of the following:
- Press [Call Rest.] repeatedly until the desired restriction is
- Press [Call Rest.] repeatedly until the desired restriction is
displayed.
- Press [Call Block] to prevent or allow room-to-room calling
when call blocking is in effect. The display shows "Affected"
when Call block is set.
when Call block is set.
- Press [Exit].