iSimple DUALINK PGHFD1 用户手册

15

Radio shows “DEV INIT”

Media Gateway device is 
initializing.

This only occurs the first time the Media Gateway is 
powered on. Wait a few minutes, cycle ignition off and 
on then enter SAT mode.

Radio shows iPod not 
connected.

iPod cable is not connected 
to iPod or Gateway.

Verify the docking cable is connected to the Media 
Gateway and the iPod.

I can not correctly browse 
the iPod through the radio.

The iPod firmware may be 
out of date.

Update the iPod firmware for free at http://www.apple.
com/ipod/download.

I have updated my iPods 
firmware and still have 
control issues.

Sometimes the iPod needs 
to be reset.

Press and hold the center click and menu buttons 
(iPods with clickwheel) or the home and power button 
(iPhone & iTouch) for 10 seconds. This will re-boot 
the iPod. YOU WILL NOT LOSE MUSIC on the iPod 
by doing this reset.

I don’t see iPod artistor 
song information on the 
screen.

The radio is displaying a 
different text field.

Press the display button to see the correct text field. 
If the problem persists please see the “Dipswitch 
Overview” section.

I can’t use my iPod’s click 
wheel to select music.

The iPod is in external 
control mode. This allows 
text to be displayed on the 
radio screen

Press the Aux/Sat button and select the AUX source 
to control the iPod from the click wheel.

The Media Gateway does 
not recognize the HD 
tuner (HDRT).

The HD tuner was not 
properly connected when 
the PXAMG was first 
connected and initialized.

HDRT must be connected before the PXAMG is 
plugged in. Disconnect the PXAMG from the vehicle 
harness for at least 5 minutes. Verify the 8 pin DIN 
HDRT cable is securely connected at both ends 
before reconnecting the vehicle harness.

When I listen to the factory 
AM or FM radio there is 
only static, no audio.

Factory antenna cable is 
connected to the HD radio 
tuner.

Use Media Gateway to access HD radio source. This 
will provide all AM and FM reception for your vehicle.

No AM or FM reception 
using the HD radio source.

Factory antenna cable is not 
connected to the HD radio 
tuner (HDRT).

Remove the factory antenna plug from the factory 
radio and connect to the HDRT module. **NOTE - 
some vehicles need to use an aftermarket antenna 
adapter to make this connection.

HD radio station quality 
fluctuates or is lost 
randomly.

The HD tuner is temporarily 
losing reception of the 
Digital HD radio broadcast 
signal.

This is expected performance. The digital HD radio 
playback will resume in areas of higher broadcast 
signal strength.

I hear the iPod or HD 
Radio but the separate 
screen does not display 
the information.

The PGHFD1A harness 
is required for vehicles 
equipped with a separate 
LCD screen.

Install the PGHFD1A harness as described on page 
4.