Harbor Freight Tools 7 in. 10 Amp Variable Speed Polisher 产品用户手册

Page 10

For technical questions, please call 1-800-444-3353.

Item 69474

Specifications

Electrical Rating

120V~ / 60Hz / 10A

Motor No Load Speed

600-3500 RPM

Max. Accessory Diameter

7″ (178 mm)

Spindle Thread

5/8″ x 11 TPI

Accessories

(sold separately)

Backing Pad

Foam Pad

Polishing Bonnet

Sanding Discs

3146023

Setup - Before Use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Release the Trigger and unplug the tool from its electrical outlet before

assembling or making any adjustments to the tool.

Note: For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

ASSEMBLY
Installing the Auxiliary Handles

TO PREVENT SERIOUS INJURY:

Do not operate this tool with one hand only or without the Auxiliary Handle(s) properly installed.

Figure A: Handle Installation Options

This Polisher/Sander includes two types of auxiliary handles. The D-Handle may be installed

for either right-hand or left-hand use. The Side Handle can be installed in one of three

positions on the head of the Polisher/Sander or together with the D-Handle.

SAFETY

OPERA

TION

MAINTENANCE

SETUP