Stihl FS 45 说明手册
32
English / USA
FS 45, FS 46
Assembling the mowing head
:
Fit the empty spool in the mowing
head.
head.
:
If the spring (4) has popped out,
push it into the spool (2) until it
engages in position with an audible
click.
push it into the spool (2) until it
engages in position with an audible
click.
:
Mount the mowing head as
described in chapter "Mounting
Cutting Tools" / "Mounting the
Mowing Head" / "STIHL AutoCut C
5-2“.
described in chapter "Mounting
Cutting Tools" / "Mounting the
Mowing Head" / "STIHL AutoCut C
5-2“.
Winding Line onto Spool
:
Use nylon line with a diameter of
0.080" (2.0 mm) (green).
0.080" (2.0 mm) (green).
:
Cut two 6’ 6“ (2 m) lengths of line
from the replacement reel.**
from the replacement reel.**
:
Rotate the spool (2) counter-
clockwise until the two arrow points
are in alignment.
clockwise until the two arrow points
are in alignment.
:
Push the straight end of each line
through one sleeve (5) in the
mowing head (3) until a noticeable
resistance – and then continue
pushing as far as stop.
through one sleeve (5) in the
mowing head (3) until a noticeable
resistance – and then continue
pushing as far as stop.
** See "Special Accessories"
:
Hold the mowing head steady.
:
Rotate the spool counterclockwise
until the shortest line is about
4" (10 cm) long.
until the shortest line is about
4" (10 cm) long.
:
If necessary, cut the longer line to a
length of about 4" (10 cm).
length of about 4" (10 cm).
The mowing head is now full.
Schnur/LINE 1
681BA022 KN
2
4
Schnur/LINE 2
681BA023 KN
5
Schnur/LINE 1
3
3
2
681BA024 KN
Schnur/LINE 2
Schnur/LINE 1